+ 5 Reconstituting crashed gear-A simple tip
I'm sure there are many of us who've received one or more crashed gear vials from your source probably during the cold winter months. Whenever this happens to me I use a simple method to fix it, and I'd like to share that with you.
First of all, I use Hothands Hand Warmers, which are packets of ingredients that heat up when you open the outer package and expose them to air. You have to shake them up, and they'll heat up on their own in about 10 minutes. They are easily obtainable in many stores like Home Depot or Lowes.
What I do is take one of these packets and shake it up vigorously for about 15 or 20 seconds, then wrap it around the vial of crashed gear and put either a small piece of tape or a rubber band to hold it around the vial. Once the packet has heated up, you can shake up the vial with the packet around it every five minutes or so, and in just about 20 minutes or so, you'll have perfect oil with no crystals whatsoever! Your gear will be 100% reconstituted.
To me, it's a very simple method without wondering how long you should put it in the microwave for, or how hot should the water be that you're using to sit the vial in, or having to worry about your glass vial breaking. I've used these on fully crashed vials with no problem, and you don't have to worry about having enough heat because it's the perfect temperature and lasts up to 10 hours.
- Bookmark
- 5
- 0
.
I have and will never ever put my gear in the microwave! Fuck that, nuking shit you gonna inject deep in your body just never sounded or sat right with me, sounded and seemed dangerous and just to be honest " scummy" id rather dispose than nuke.
Back in the day about a cm of water in a saucepan on stove, place vial standing with drawing needle in stopper, wait take out swirl around and its done.
Easy and way less danger and more sensible
I better invest some stock in handwarmers now.
Any thoughts or tips on how to get test suspension (in water) to better dissolve? I prefer TNE (no ester in oil) because I don't have near the issue with clumps forming and not wanting to draw into the needle like I do with suspension in water. Currently have one vial of suspension in water sitting around which I would like to use, but currently need at least a 21g to draw and pin with which is a little much for my taste. I much prefer to pin with a 25 bit will use a 23. Don't like going much bigger than that though.
Might be SOL...
SUPPLIER HAS TO USE MICRO RAWS.
AND...KEEP DOSAGES AT 50MG PER ML... MAYBE UP TO 75MG...BUT I WOULDN'T.
DON'T TRY TO WARM UP WATER BASED WITH STOVE HEAT.
IT'S JUST NOT WISE...WILL COOK OFF BA AND YOU'LL GET A LOVELY INFECTION.
HARPOON NEEDLE OR NOTHING LOL.
Thanks bro. I am going to gift it to a friend and just get some TNE. I've only found one brand of suspension that I can put through a 23/25 g and the PIP is crippling. Much prefer the oil
RustyhookerYou need to find a brand thats better ground in suspension. Its out there.
There is one that really stands out above the others in my opinion. This is not it though lol. Never should have strayed
Alphamale500Personally, I never used test suspension before. It seems too hard to control the sides. But like Makwa said, any suspension is never gonna dissolve. That's part of the purpose and definition of a suspension. You said you need a 21" to pin it, but would a 22" pin work? That wouldn't be that bad. But I don't think there's much if anything you can do to help "dissolve" a suspension except the obvious which is shaking it vigorously.
Btw, how do you find controlling the sides that go with test suspension, like the drastic rise in estrogen, and lipid values?
Thanks for the feedback. I have never had issues with sides, but I also use it very sparingly as a PWO on heavy days like back or legs, or when I am really dragging and need that extra kick. I have never used it as a foundation of a cycle. I imagine that would be a bitch with the sides and needing to inject at least twice daily, probably 3 times.
Please note that I use this as a PWO occasionally (3x month max) because I am on TRT and don't PCT. If your not on TRT DON'T use it off cycle (that is a warning to anyone reading this post, not being said to you directly @Alphamale500)
Alphamale500Thanks for your comments as well.
It is suspension, it won't dissolve. The solution is to make sure that any suspension you buy is micronized so that it passes through smaller gauge or just use TNE.
Thanks for the feedback. I had a feeling that was the case. I much prefer TNE, but came across some suspension for a steal a while back and couldn't resist not grabbing a jug or two. I'm just going to stick with TNE in the future.
Suspension used to do my nut in...
suspension and winstrol........... aaaaahhhhh............. i never had the patience to fuck around with either of those because they are so fkn hard work to load/pin fast and smooth.
TNE and masteron................ far superior in every way imo.
The last and only time I tried suspension I had to use such a dam big needle that I knew right then and there this wasn't going to work. TNE isn't bad but I can never get the timing down when using it for a little prewo boost. Sometimes it doesn't hit till 3hrs after pin and others an hour and it is raring to go. To much hit and miss for me and then I was always so damn sleepy after it wore off.
better off drinking the winnie ftw
done that got the Tshirt brother...........
masteron used right gave me far superior results when i was hardening, and also helped knock all that PCT bullshit on the head when i went Blast/cruise for something like a decade lol
I'd well believe it you mad fucker LOL
Yeah Im not a big fan of winnie, but I am also a fat bastard so 2+2=!!!!. about to tip into some masteron now for a fast naughty cut, see what happens this time! Then its PCT heaven! hurrrraayy!
yeah doing too many back to back comps put me in a sorta no choice position bro....... fkn stupid really when i think back but thank the lord i have managed to come out the other side pretty much unscathed.. doctors report the only issue i suffer from these days is one kidney is not functioning at 100 % and i have to take a pill every day just to control slightly elevated blood pressure..... its unbelievable really after the long term use of all sorts of gear, peps, massive protein intake for nearly 40yrs....... i have been lucky bro, a lot of guys i know suffer from some real nasty shit now ( or dead) that didnt use anywhere as much as i did.
Question i get asked a lot........... would i do it all over again knowing what i know now?
Damn right.......... i loved every fkn second of the journey.
Well I will tell you one thing man, after reading all your stuff on here over the years..... You have a book in ya fella. I saw your other post, that you're planning a series of posts on the life.
That's gonna be fuel for a lot of men on here, me included. Although Im just a gym rat... stick me in the dungeon and leave me there and Im happy out haha
Cant wait to read it all man, but seriously, consider the book!
I've turned the coffee pot on and set the vial on the hot plate. Takes about 20 minutes also.
Sounds very good. I'm sure it will help a lot of members.
Alphamale500Thanks bro!
Good advice I like this idea..+1
Alphamale500Thks to you as well.
RustyhookerI like your thinking. Outside the box but would work without overheating
Alphamale500Thanks. And like I was saying, you can actually just put the handwarmer around the crashed vial and just let it sit for about 20 minutes, give it a good shake and it's done. And like you mentioned about overheating, with a lot of other methods that is a common concern. With the handwarmers, overheating is not a concern even if you leave the handwarmers wrapped around the vial for the full 10 hours that they last, and it's so simple.
Heating pad on high works too.
Yeah? Well what about when the power goes out during the zombie apocalypse huh? Or if you live in Puerto Rico? His chemical hand warmers will work no matter what.
Damn good point you got there Greg. In the case of zombies there should be plenty of dead bodies lying around so my suggestion there, if youre unprepared and run out of handwarmers, is to jam the gear inside the abdomen of a very fresh corpse to heat the gear. just don't forget to swipe it a couple extra times with a swab and don't forget to retrieve it before the corpse reanimates. Simple enough.
Alphamale500Using a heating pad sounds like a good idea too! I liked the idea so I actually tried it yesterday, but on high it made the vial so hot it was almost burning my hand. I guess it depends on the strength of your heating pad, but I'd keep it on low and be sure to keep a eye on the vials. Still a great idea!
For me low is fine for pre warming gear before pinning but uncrashing gear takes a little more heat in my limited experience and required the high setting. But if low works for you then you're good.
X2...
I use wifes hairdryer. Its faster and dont have to spend money on handwarmers
Alphamale500Sure, I guess we all have our preferred methods. The hairdryer sounds good, but you probably have to hold it in place and have to worry about not keeping it too close to the vial so you don't get the vial too hot, right? With the handwarmers, you can just let it sit and forget about it if you like, come back in about 20 minutes and it's done. And you never have to worry about the vial getting too hot and possibly cracking the vial.
But as for spending money on handwarmers, their actually dirt cheap. You can get them for 50 cents for two of them. And I don't think that too many of us are fixing that many crashed vials.
Never have to worry about cracking the vial. I put it on high count to 30 and its good to go. I heat mine this way before every injection. Smooth and pip free everytime.
Hair straightener works to lol just put it on the counter and set it between the 2 heat pieces. Lol works good
I’m not sure how my Mrs would feel about me using her GHD’s to warm up my gear..
Alphamale500Lol!