+ 4 Fixed OR Luer Slip Insulin Needles?
Since I am a 'Young Buck' to this Peptide/HGH malarky unlike many seasoned Vets on here - I'm interested to know what kind of Insulin Needle you guys use to pin Peptides and Daily TRT Oil injections.
I've always bought Fixed Slin needles with a 30g needle, but I find I can't even draw up oil in these things anyway, and when attaching a 30g needle on to the end of 2ml Slip barrel I also can't push the oil through them.
When it comes to peptides I can draw the water solution up from one vial and after some hard pushing inject it into the shoulder (because the needle has already blunted from the vial) - drawing up from a second vial then means the needle becomes so blunted it almost won't go into the skin.
On looking around at online medical shops, I see you can buy 1ml Insulin Needles with Luer Slip tips. So my question is do you guys all buy these instead of Fixed needles - then say use a normal needle to draw oil then buy some 27g needles to inject?
PLEASE Don't Bully me or tear me a new asshole over this guys, as I am an Eroids virgin and will spit my Dummy (Pacifier) out if I don't like what I hear 
- Bookmark
- 4
- 0
I’ve noticed I can’t pull oil through 27g Luerlock syringes and have had no issues pulling through 30g fixed, it’s slow but you can still draw it up as long as it’s a fixed in my experience.
Dang everyone on here uses some small needles lol
Use 30g 1/2" for oils. Its now my ED go to. Sure its slow to draw some oils but Im fine with it.
EasyTouch 27G × 1/2”, 1cc fixed needles are my go-to for almost everything. Even drawing from multiple vials, I don’t have any issues with blunting. I do use a candle warmer for my oils, and it can still be a slow injection. Sometimes rotating the needle a quarter turn or changing the angle a few degrees after it’s in the muscle helps.
I do have some larger luer slip barrels and a few different needle sizes, but I hate using them. If the dead space is 0.05-0.07 mL and you want to inject 2cc, you have to draw 1.93-1.95 mL on the barrel to account for it, then add another 0.05-0.07 mL of air behind it. Such a pain in the ass. I’d rather take two shots with a fixed needle than fuck around with the air lock technique and the math every time.
I mostly use the luer slips for mixing peptides and HGH.
I really wish someone made a 3cc fixed-needle syringe.
I use 18ga 1/8 inch for everything
I remember when I started saucing in 2011 was hard to get pins. So we (the local juice heads) would go to Hay and Feed stores and buy the 18gauge (fixed can’t switch) 1” pins.. caught staff infection from pinning my calf with that fucking harpoon.. so glad we don’t have to live like that any more
Tractor Supply for the win! --
Hahaha older I get the more I love that store and I never buy anything in there.
Ain’t that the truth! It’s like Home Depot or Lowe’s. I know I don’t need anything else but these light bulbs but that new dewalt table saw looks good in my garage lol.
Dude No Homo I fucking love bath and body works lmao I be dropping all kinds of money of hand soaps - candles - body wash
Lmao I got a stash of hand sanitizers from there. There’s one in every place I frequent plus one I carry. Can’t be clean enough plus smelling good mmmmhhhmmmmm
HAHAHAHAHAHAHAHA HOLY SHIT!! I can't imagine trying to smash an 18ga inside my body.
When I first got on the TRT I was given 18ga to draw with, and they would literally just rip fat ass holes in the stoppers. I was like "hmmm"....
I still have a whole box of em if you wanna go back down memory lane.
Hahahaha nah you keep em bro-bro. Dude but imagine drawing and pinning with the same ass 18 gauge lol
Do ya fuck you bullshit merchant. You can't handle an 18-gauge needle. Those are for fucking blood draws!!!
No.
They are for shootin gear in a hurry
That’s a man’s needle.
Mmhmm that's right
Is it just me or are Luer Slip 1ML Insulin Needles a real bugger for leaving 5 units of water left over in the barrel as opposed to the fixed needle insulin barrels, where there's no water left? @SeeOhShow
I even got the minimal dead space slin needles but they still leave 5 units of water volume.
I stopped using those for that reason. I’m not a rich person to be wasting gear like that and I’m too paranoid to have an air bubble like seephshow does to push everything in. I just draw and pin with fixed 29g 1/2in, oils and peps.
Gotta live life on the edge lol. The air bubble won’t hurt you injecting into muscle anyways. Nor are we ever mainlining gear into a vein. Definitely have to do the air bubble trick when pinning with 3ml barrels, otherwise you’ll be leaving at least an entire vials worth of gear behind over a whole cycle
Just gotta suck it up and send it? Got it! Haha. Thank you for the insight and knowledge. I still have the dead space luers so I’ll try with those! Much appreciated again!
Sorry. How much of an air bubble do you use to push? Like a good estimate. Is .03units alright?
However much air fills that little hub for the needle. That’s where all my oil was getting stuck. It’s a very minimal amount of air. 0.03-0.05 should absolutely cover it. The 1ml barrels really fit like 1.15ml so there’s plenty of room to pull up an air bubble. I haven’t died yet and I do ED injections whether cruising or cycling so thousands of sticks at this point all with that little air bubble technique
Goood to know brother as I do ED pins too. Thank you again!
Yea even the no dead space ones with the pointing plunger leave shit behind. That’s why I pull in an air bubble above my liquid so it pushes everything out
I can't believe I've never considered this....
I'm just sitting with a needle all the way in pressing AS HARD AS I CAN on the plunger trying to get all that oil out. But now I don't have to ..
Thanks man!
I use EasyTouch insulin syringes for Peptides, 30g and 31g and the length is up to you based on how fat you are.
For oils I use BH for my syringes, and are Luer Lock as well, and I use Careach for the needles. The lengths I use very from 0.5 inches up to 1.5 inches based on the injection site.
23G needle for Draw
27G for injection
Peptides I use 31g 5/16 fixed
Oils I use 29g 1/2" and 30g 1/2" fixed as well.
I back load all of my syringes while drawing oil with a 23g and peptide with a 29g.
Have no issues pushing any out, though I do like the 29g the most.
I use luer for oils. 22 to draw and 27 to inject. I don’t like waiting for the insulin syringe to draw. I use insulin pins 30 or 31 for peptides.
Peps
31g 5/16” fixed. Multiple vials no issues with blunting.
Oils
Multiple types
27g 5/8” fixed
21g luer lock to draw
23g 1”, 25g 1”, or 27g 1/2” and 1” luer lock to pin.
DEAD NUTZ
This. Dead on.
What brand of fixed needles do you use? Mine are BD and once they have gone through 2 stoppers they are fucked!!!
Amazon stopped carrying the good brands all cheap ones I rape myself with
We have quite a few online Medical supply stores here now since the Steroid epidemic!!! LOL
You can buy all kinds of medical equipment doctors and surgeons use - Scalpels the lot!!
If you are still wanting that Sex change pal come round to mine and I'll get ya converted LMAO
I’ve just been working on my Tuck game to save money lol Pikey
Easy Touch
Not the Prostate massager - the needles mate
Lol
I have 27g fixed for my oils that I backload and peptides I use 29g fixed only cause the 31g seems to always be sold out
How do you pull oil up through a 27g needle mate??? I can't even get it up through a 25g - I always use 21g for drawing.
Lol...answered that below and still run 29 on pharma trt...Castor thick af....gso..mct...etc. patience. All the you goofs back with redirects popping 18ga....I know you remember those. Getting a 22 was a wow til 25s. You want 3cc instant well...you get it. Lol...18ga and done. Lol
I have the vial spikes so I use luer lock syringe to draw then backload the pin with a 21g
AAAhhhhh Cheater!!! lol
I use the easytouch 31g 5/8in fixed insulin syringes.
So are we saying people generally buy Fixed 29/30g for water peptides and then Slips for Oils?
Thats what I do. 25g 1in luerlock with a 3ml syringe for VG and then 31 for peps/hgh
Yep, little baby 31g 5/8" (8mm for you wierdos) for peps, and I pin all my oils using 25g 1" leur lock in a 1ml barrel. Haven't hit the stage in my life where I'm pinning more than 1ml at a time, but you never know where life will take you so we'll see lol.
The Day you realise you've become a proper Steroid Junkie is when you have to start buying the 5ml Barrels mate to fit everything in - that's when you can no longer be in denial LMAO
Lmao, I ain't even close to that yet, but I do plan on running at least one big boy cycle in my life. Think I'll build up to that for a couple years, then when I turn 40 in 2028 go balls out for 12 weeks lol
Not sure my ass is big enough for 5ml of oil…