inked's picture
inked
  • 477
2507

Melatonin II

ad

Hey guys,

After reading through the posts on here about melatonin II, I decided im going to give it a try. There seems to be a lot of discrepancies when it comes to dosing amount/time of does/IM vs sq.
 

I decided on the following “cycle” of it…however any and all feedback is definitely welcomed.

For the first two weeks I am going to use .5cc (.5mg) ED. It will be injected sq right around my bellybutton at night right before bed (I have read it can cause nausea for a few minutes, so right before bed will help with this). After the first two weeks, I will evaluate how the “tanning” is going. If needed, I might bump it up to 1cc (1mg) ED.

The maintenance dose will be 1cc (1mg) every week once I reach a color I am happy with.

One thing I did not read was if Melatonin II needs to be refrigerated like HCG?

Also, I am picking it up from MP research and it does not specify if it needs to be reconstituted with bac water? Should this be implied as all melatonin will need to be reconstituted? 

P's picture

How To Reconstitute Melanotan-2 Peptide (Step-by-step guide w/Pictures!)

Melanotan-2 is a peptide which is bought in powdered form. In order to inject this compound, it must be reconstituted through the use of either sterile water or bacteriostatic water. Both are acceptable re-constitutional ingredients, however the use of sterile water will see the Melanotan-2 degrade at a faster rate than bacteriostatic water.

Preface
Assuming your vial of Melanotan-2 is vacuum sealed (as many are), when you reconstitutie the Melanotan-2, withdraw your sterile water/bacteriostatic water then firmly hold the plunger of the syringe as you insert it through the stopper of the Melanotan-2 vial. Don't let it suck the water from your pin. Turn the vial at a slight angle and slowly drip water down the side of the vial being sure not to shoot water directly at the powder. Your Melanotan-2 should melt, if it fizzes up you've possibly just damaged the hormone. Do not shake the Melanotan-2, instead lightly swirl it and store it in a fridge and use for upto 30-60 days

Ingredients
1 x 10mg Melanotan-2 Vial
Sterile Water or Bacteriostatic Water
1 x 1ml 29g 1/2" Needle (Insulin Needle)
Alcohol Swabs

Dosages:
Working out dosages for Melanotan-2 is simple.

Different Dosing Amounts

With 2ml of bacteriostatic water in the 10mg vial, here are what your doses will be;

+) 250mcg/.25mg = 5ius

+) 500mcg/.5mg = 10ius

+) 750mcg/.75mg = 15ius

+) 1mg = 20ius

Step 1:
Take the cap off the Melanotan-2, so that it is ready to be swabbed by an alcohol pad.

Step 2:
Prepare Insulin Needle (1 x 1ml 29g 1/2" Needle).

Step 3:
Use an alcohol swab to wipe the top of the Melanotan-2 vial.

Step 4:
Prepare Sterile Water/bacteriostatic.

Step 5:
Withdraw water from the bateriostatic water vial.

Step 6:
Inject bateriostatic water into the Melanotan-2 vial, slowly and ensure the water does not come in direct contact with the powder, instead inject so that the water falls onto the side of the vial and hits the glass before it comes into contact with the powder - Melanotan-2 alongside all peptides are very sensitive compounds.

Be very careful that there is no vacuum from the difference in pressure with the atmosphere and the pressure within the vial. To combat this, inject the amount (ml) into the vial before withdrawing that same amount (ml).

Step 7:
Now either store the Melanotan-2 in the fridge ready for consumption or inject subcutaneously (a step-by-step guide will follow).

Garageth's picture

Use bac water to reconstitute, I use 2ml BW to 10mg MT2, makes the dosing a bit easier. Keep it in the fridge and it doesnt hurt to throw in a little UV after a few days to even things out, otherwise you will find things a bit uneven for a while (face and arms really dark!) SQ injection and also be aware that it is know to cause spontaneous "hardwood". Depending on your size/weight, I would look at starting .5 and then going to 1 after about 4-5 days and then evaluating around day 20. Also, for me, a glass of silk (I dont do milk) helps settle the stomach.

inked's picture

On a slin pin, would .5mg only be two units if diluted with only 2ml bad water? Just wanted to double check my math....haha

Garageth's picture

I use comfort point u100 1ml. Marked 100 per 1ml. With the 2ml bw it breaks down pretty simple.
100=5mg
80=4mg,
60=3mg
40=2mg
20=1mg
10=.5mg

If the pin is marked 10/1ml then 1=.5, 2=1 and so on

Also, a couple other things, it will cause freckles to darken HARD AND FAST! I had a couple on my shoulders and one up by my hairline that really got dark early on. The one by my hairline actually had me initially wondering how I had gotten a grease spot or ink mark up there after I got out of the shower and was standing at the sink shaving. It's more even now tho since the skin has continued to darken. The other thing is (for me) it started knocking out the gray. During the winter I usually use a #5 or 6 rake on the clippers and had a pretty good salt&pepper thing going up top with the goatee being almost all gray. When I had my barber cut it last week, she used a 3 on the top, so all that was left was basically new growth from the past couple weeks. There is almost no gray at all. On the goatee, I haven't trimmed it yet, but looking at it in the mirror, the roots and base are back to normal color with the gray on the outer 75% of the hair. If I were to trim super short on the goatee, it would have almost no gray too.

inked's picture

Damn guy, thanks for all of the info! I am getting pretty excited to try it out!

Garageth's picture

I suppose you could, but its alot easier to do the SQ and rotate spots on the stomach.

livingthedream's picture

I didn't use 10ccs of water; you can make do with significantly less and makes it easier for the subq injs.

Refrigerate after reconstituting. Bac water is recommended.

I got better results taking a dose about 1.5-2hrs before tanning. I didn't load up for days prior other than some smaller injs just to see how it would effect me.

I started it about 3 weeks ago and no shit, I went from white to my friends making jokes with me saying that I look like R Downey Jr in Tropic Thunder. Everyone and I mean everyone is tripping out when they see me the first time since I started.

inked's picture

Maybe only 5cc bac water making .25cc (.50mg) sq.

So in 3 weeks you seen that dramatic of results? What mg were you taking?

Nitti's picture

I haven't read much into this. Is there a limit to how dark one can become? I mean could someone go from carrot top to Wesley Snipes??

ChemDawg's picture

Maybe not that much, but mt skin went from Carrot Top to looking hipanic in 2 to 3 months. I went a little overboard the first time, I wanted to see how dark I could get. I might of even got darker if I didn't stop the MTII and tanning. Now I now I'm good with 1 vial in early summer instead of 2 or 3. It helps me from getting sunburnt because I have light skin.

inked's picture

I don't know about a limit, but I have seen some people get carried away with it...I'm assuming this is based off the dose and frequency. If you search the photos, there are some nice before and afters! I'm looking for a jump start to summer and don't want to spend a ton of time in the tanning bed!