posted Sun, 07/28/2013 - 15:40
983
Heating gear
ad
Can you ruin your gear if you heat it up too hot if there are crystals in it? Because my masteron turned real dark after a couple days
- Bookmark
- 0
- 0
RustyhookerWhat temps or how are you heating? Yoked is correct below. Steroid has its melting point to save crashed gear. But if it's re-crashing then contact seller. Color is from heat and too much heat can breakdown the carriers.
imafagnever know until you blast it. go for gold
Funny guy.... i hope you are getting a hard on trying to fuck with me you brainless prick.
Maybe his mothers name is also Viking and she's a dirty ho. Probably humped all his buddies when he would bring them over to play after school. I've seen it a thousand times.
Overheating can have adverse effects on the gear, but predominantly on the carrier oil. Your mast e may have turned brown due to the oil getting scorched, but degradation of the hormone will likely be very minimal. As long as the vial stayed sealed, sterility shouldn't be an issue either. The oil may become a little more painful to inject, but all in all the gear is still usable.
ClassyChassisI have seen Test E powder turn brown just sitting. Test E has a low melting point as does bold cyp. Both can be liquid at room temperature. I somehow suspect that it may be an impurity that is degrading/ oxidizing. It wouldn't have to be present in a large amount. It's possible that you burned it but unless you went really high, it's probably fine.