mskywalker's picture
mskywalker
  • 13
2869

EQ 200-300ml vs 500ml

ad

I've never tried EQ so far and I was just looking around and I saw some sources selling EQ at 500mg/ml so you get 5g EQ for 1 vial and compared to the 2-3G Vials the 5g Vial is most of the times ALOT cheaper if you would it compare to buying 5, 200mg/vials vs 2 of the 500mg/ml vials.

So my question is there's gotta be something to it...

Is it likely to be underdosed or does the 500mg/ml gives horrible pip or something?

fyronix's picture

It really is the fact that it's the only common AAS that sits liquid at room temp. It will hold at super high concentrations much easier than other compounds. Just brewed some up at 500mg/ml this weekend:)

fbfreak985's picture

In my experience Iv ran one of those 500mg EQ's from a pretty good source too and it did its job but then I ran EQ 200 from a great lab and at 400 a week it blew my mind. I felt like it couldn't be anything but EQ and it felt much more powerful. I don't think it has to do with mg/ml (they might be saving on vials, time, labor) I think most important is quality not price, hands down. You can't even compare.

Swoleoil's picture

The biggest issue at concern in my opinion is filtration. The higher the mg/ml the thicker it will be. At room temp you will have a major issue running it through most filters. If you heat it it will be thinner but now the temperature puts most filters at risk of failing. I prefer 350mg/ml as the best of all worlds number. Just my 2 cents.

Makwa's picture

1000mg EQ....smooth as molasses...

IrishMack's picture

EQ in its purest form is already a liquid and to make it higher then normal doses is very suspect. Think about it for a minute, vets have been using it on horses for years, why did they only carry it in less then 100mg? Why wouldn't the vets have it increased to over 500 and hit the horse with less? Maybe they can but it has to be very unstable at such a high mg.

Ozninjaguy's picture

From my observations most vet gear is around the 100mg/ml range. Simply because they treat a wide variety of animals from cats to horses - so it's easier to adjust a 100mg dose to suit the size of the animal, no need to have several vials of the same gear at different potency.

Makwa's picture

I have seen EQ at 600mg/ml. Stuff is thick as tar. The lower mg would just be easier to push through a smaller gauge pin. Warming up 400mg EQ I can still pin it through a 25 g but it definitely has to be warmed up first.

IrishMack's picture

Makes it easier to hurry up and get it in a horse rather then taking forever to push through even with those vet 18 gauge 10cc needles.

Makwa's picture

I think you would need at least an 18g with that 600mg.

IrishMack's picture

My endo started me off on 20 gauges, until I smartened up and wanted to stop stabbing my self with straws and went to 25, soon I will try 27 if they make them in a 1 inch with a 2cc barrell removable needle.

Makwa's picture

I have looked the world over and have not been able to find a 1" 27g. 1/2" and 1 1/4" seem to be about it.

IrishMack's picture

I bought 100 26g from Amazon, it only comes with the pin you buy the barrels separate. It's a challenge to inject 1ml and your fingers get a workout but it's decent, paid 11.00.

Makwa's picture

I have seen those. I don't think they are the thin walled or ultra thin walled needles though. I think that is why it can become a real challenge to get the oil through.

Trenagade's picture

Nipro makes a 27ga 1" needle, I believe it's luer lock. Found it on amazon so try searching there.

MedDx's picture

Nipro is a decent pin...that's what I use...

Trenagade's picture

I use BD, just always feels smoother to me

Dacky's picture

Yes agreed. I too have not succeeded in my search for the same. Luckily by the time I'm pinning short esters and doing ED pins I'm pretty lean so using 1/2" pin is ok on most sites except glutes.

Trenagade's picture

Eq is pretty painless even at higher concentrations. It's a liquid at room temp in its raw form. I mainly stay away from higher mg gear just cuz I assume it's more likely to be under-dosed. I have no actual proof of this but I did stay at a holiday inn express last night.

PPGfreak's picture

I'll be interested to see some experience bros give opinions on this. But from what I understand it can be cooked correctly at higher dosages.

In a promo × 1
Faz's picture

I've ran eq at 600mg per ml an there was no pip whatsoever. Although I can't prove what was on the label was actually in the vial

Faz's picture

I agree, it does seem a lot.
It was my only experience with eq so nothing to compare it too but I made some good clean gains from it.
It was also from a brand with a good reputation

Rugal's picture

Bigmurph as u know im a huge EQ fan. Whatever a persons goal is, this stuff is very versatile its mild and it does not give androgenic sides. I stick to a single high quality Lab and I just find this a great steroid

Rugal's picture

U will have a great time :-) look forward to hearing how it goes

Dacky's picture

I'm a fan of Bold Cyp. Let me know if you want to chat it through sometime.

Faz's picture

ye, I really liked the gains from eq an I felt they were easier to keep post cycle than some other compounds I've ran.
I would probably go with bold cyp too if I was gonna run it again, the shutdown of a 20 week eq cycle was a bit of a bitch.