posted Sat, 11/30/2024 - 13:53
1957
Frozen vial of Testosterone Cypionate
ad
My Vial of Test C froze in my mailbox over the holiday while I was out of town. Is it ok to be warmed up and used?
- Bookmark
- 0
- 0
Sorry if been said, just use a heating pad. Wrap it up and run it on high for a few of the timed cycles . Works perfect without worry or baby sitting
NB: Let it cool after warming. !!!!!!
Generally, if it’s an oil-based product like Test C, it can crystallize or cloud up at lower temperatures. The good news is that it’s usually fine once you gently warm it back up (like running the vial under warm water for a bit). Just make sure to watch out for any unusual discoloration, cloudiness, or particles that don’t go away after warming. If it all goes back to looking normal and clear, you’re typically good to go. Of course, if you notice anything concerning after warming it, it’s better to err on the side of caution and toss it. Stay safe!
I put mine on the burner of my stove at the lowest until it reconstitutes. It’s not a bad idea to stick a 25g or 27g pin in the top to let the pressure out as the gear reconstitutes and the oil expands. Just don’t stick it in far enough to come into contact with the oil or it will overflow.
Arm pit for 10 mins,......................there are other places I could tell you to shove it,................all very effective.
rhino82LMAO ! I'll go with armpit
Lkl0623I know that video.. my homeboy showed me that bullshit back in the day. Who the fuck shoves a whole glass jar up their ass? Fuck
We are not here to judge you because of your perversions.
Lkl0623Thanks. That really makes me feel a lot better since I identify as a glass jar anyway
I thought this was normal procedure to re heat lol
I thought the same. Good to see you back around
Coffee warmer. Water has microbes. Set on the hotplate and swirl. Usually bout 2mins does it
that's a great suggestion. I have never done that. I always use water and suspend the bottom of the bottle in the water and waited till it was 90 degrees for about 5 minutes.
Pay no attention to the microbe thing. Even at that temp microbes die so it's no big deal. Only problem is don't let water level rise beyond vial neck. Keep doing what you've been doing
Lmao!!!
Huh?
Gotta love the human creativity! I use a heating pad haha
I’d hope they’re like double boiling or running along the side if they are using water not submerging a vial in warm water with no barrier hahaha. Honestly wouldn’t surprise me if some people do that though. Wouldn’t want the pressure or microbes 100%
Wait wait wait, I put my vial in a cup of warm water before injecting, as long as the waters only half way up the vial there's no issues right? It's not gonna condensate through the glass? And if it did no bacteria would permeate that barrier correct? Stupid question perhaps but you got me tripping
Grade school we took tap water and stained slides. Was quite suprising. Lol! But yes, i boiled once and vial fell over. As it cooled it sucked in a lil water from pressure changes. Tossed it out :( .
Frozen? You mean congealed? Oil shouldn't freeze. Water freezes. Anyway, just warm it up. I would recommend using room temp water and let it sit for about 2-3 hours and it should be good.
rhino82Congeled then but it was inside the vial in a solid state. When I warmed it up there was crystals in it and on the side of the vial but I shook it up and they disappeared.
MCT oil will desolve the crystals when it hits 70 degrees. I have always put water on the stove, suspend the bottom of the bottle in the water and then got it to 90 degrees for about 5 minutes then would shake the bottle. I use 25g needles to pin. 25g needles will get plugged if they crystals are not fully desolved. Also, if you're like me and pin in your thigh, get ready to walk around like a pirate for about 3-5 days. If you pin your arse, be prepared to become a stomach sleeper and stand all day.
rhino82I pin in my delts. Sore ass hell today
+1 Pretty sure that's what he meant. You're right 100%. Thing is test c doesn't need to be in cold temps in order for it to congeal, I showed that with an old pic of mine that a few members commented on. Good point man
I’ve seen MCT turn white and basically looking solid super low temp, but yeah nonetheless should be fine.
Make sure you don’t see any crystals to ensure the hormone is fully suspended again.
Also this is something I practice but may not be necessary- let it sit at normal room/storage temp and see if and of the hormone crashes back out during the next 24 hours- some of the worst PIP I have ever had was from pinning oil I just warmed up and thought it was all suspended well but felt like fiberglass in my muscle a few minutes to a few hours post injection kinda like how suspension can feel.
rhino82It looked exactly like that. It was a cloudy white color and it was in a solid state. It had been sitting in my mailbox for 2 days in freezing conditions. I warmed it up with warm water and their was a lot of crystals in it. Warmed it up a little more and shook it and it was back to a clear oil
Should be good my man!
rhino82You weren't kidding about the pip though lol. My Delt is fucking hurting lol
I warned you to wait and see if it crashed again lol!
If it hasn’t you should be fine that pip is probably just from hormone concentration, solvent amounts, or a reaction to the carrier oil.
rhino82I looked at the vial today. It keeps crashing. Not as bad but still has some crystals. Guess I'm gonna have to warm it up everytime I use it.
Or dilute it. E.g., if you have a vial of C or E that is not crashing, blend a little of that into the vial that is.
Yup. Heat and good to go.
Though I gotta say goddamn you must live somewhere cold for oil to freeze lol
rhino82I'm in Iowa and my Testosterone got delivered to my mailbox a couple days ago when me and the wife were out of town. Was below freezing almost the whole time it sat out there
It's fine.