adamaiden's picture
adamaiden
  • 40
1119

I want to start using the Z-track method when injecting

ad

Do you all use the Z-track method when injecting. I followed a link on the forum for the Z-track injection method. I have never tried but it looks like it is a great technique. My skin has some oil around the injection site after injecting so I know I am losing some of the gear. I use the proper size needles in each bodypart and I let the needle sit inside the muscle at least 10 seconds after injecting. I want to stop the gear from oozing out after injecting.

jimboe85's picture

When uve pulled the needle out....immediatly pull the skin to one side.....this is basically z track but opposite....instead of pulling before Ijecting you pull AFTER injecting. It works for me EVERYTIME. I never loose any oil. I pull it halfway out, let it sit, then pull completely out and pull that skin over as much as possible and stick an alcohol wipe on it and hold it for awhile. Works for me

Cheatnnature's picture

Z track is good but still same leakage. If your tech is good you will be good to go. Just press really slow and when you pull out make sure you pull out safely and slow and u will hardly have a drop of blood.

ac89's picture

remember if you push a little oil out on the needle that when you inject it can look like it has pooled around the site from where it came off the needle.

adamaiden's picture

great information. I appreciate your advice and information.