posted Fri, 05/04/2012 - 11:33
2396
Help with hcg
ad
I have a serious hole in my cycling knowledge and that is hcg.
I know that you can buy a bottle of say 5000 which is just powder and you have to put water in it. But what water should be used. Also how do you use it?
Cheers
- Bookmark
- 0
- 0
How To Reconstitute hCG (Step-by-step guide w/Pictures!)
hCG is a peptide which is bought in powdered form. In order to inject this compound, it must be reconstituted through the use of either sterile water or bacteriostatic water. Both are acceptable re-constitutional ingredients, however the use of sterile water will see the hCG degrade at a faster rate than bacteriostatic water.
Preface
Assuming your vial of hCG is vacuum sealed (as many are), when you reconstitutie the hCG, withdraw your sterile water/bacteriostatic water then firmly hold the plunger of the syringe as you insert it through the stopper of the hCG vial. Don't let it suck the water from your pin. Turn the vial at a slight angle and slowly drip water down the side of the vial being sure not to shoot water directly at the powder. Your hCG should melt, if it fizzes up you've possibly just damaged the hormone. Do not shake the hCG, instead lightly swirl it and store it in a fridge and use for upto 30-40 days
Ingredients
1 x hCG Vial
Sterile Water or Bacteriostatic Water
1 x 1ml 29g 1/2" Needle (Insulin Needle)
Alcohol Swabs
Dosages
Working out dosages for hCG is simple.
+) If you have 5,000IU hCG in the vial, and 20ml of sterile/bacteriostatic water, reconstituting this will create 250IU/ml.
+) If you have 5,000IU hCG in the vial, and 10ml of sterile/bacteriostatic water, reconstituting this will create 500IU/ml.
+) If you have 5,000IU hCG in the vial, and 5ml of sterile/bacteriostatic water, reconstituting this will create 1,000IU/ml.
+) If you have 5,000IU hCG in the vial, and 2ml of sterile/bacteriostatic water, reconstituting this will create 2,500IU/ml.
+) If you have 5,000IU hCG in the vial, and 1ml of sterile/bacteriostatic water, reconstituting this will create 5,000IU/ml.
Step 1
Take the cap off the hCG vial, so that it is ready to be swabbed by an alcohol pad.
Step 2
Prepare Insulin Needle (1 x 1ml 29g 1/2" Needle).
Step 3
Use an alcohol swab to wipe the top of the hCG vial.
Step 4
Prepare Sterile Water/Bacteriostatic (Sterile water in this case) ampoule and identify cracking point.
Step 5
Crack ampoule.
Step 6
Withdraw water from the sterile water ampoule.
Step 7
Inject sterile water into the hCG vial, slowly and ensure the water does not come in direct contact with the powder, instead inject so that the water falls onto the side of the vial and hits the glass before it comes into contact with the powder - hCG alongside all peptides are very sensitive compounds.
Be very careful that there is no vacuum from the difference in pressure with the atmosphere and the pressure within the vial. To combat this, inject the amount (ml) into the vial before withdrawing that same amount (ml).
Step 8
Now either store the hCG in the fridge ready for consumption or inject subcutaneously (a step-by-step guide will follow).
mark
CHeers all, you have been a great help. Am i right in thinking that you inject near your belly button?
Anywhere subQ, belly is easy but usually more fat, you should switch up locations just like pinning AAS. Just read inner thigh has a better absorption rate on an HGH site.
Cheers bud. Are insulin needles a standard length?
They run different lengths and pin sizes. The bigger the # the thinner the pin. I use 28g, 1/2". I use these for HGH, HCG, IGF-1 L3, Melanotan2, I have also been pinning Prop in the delts with these after my HGH injection.
I just ordered some of that melanotan2, it any good? Doesn't turn you orange does it?
I just finished running some melanotan 2 from labpe.com and it was good stuff. It didn't make me orange at all just tan as hell really quick. I was showing a good tan about ten days in. Check out my before and after pics.
Nah, a lil purple sorta (with the burn from the tanning bed) as I was going through the first week or so, now all pretty even tan/brown. My wife says I'm too dark cause I've never been this dark before (Irish and German, Blonde hair)!
Buy 1cc insulin pins, and Bacteriostatic water online, check amazon.com.
If you use 2ml that would be filling the slin pin twice to add to the bottle.
Each 1/10th of the pin will be 250iu.
5,000 iu vial reconstituted wit 10 ml of bacterstatic water is 500iu per ml (take 5,000 and divide it by 10 = 500). Ive been told to run it on cycle at 250iu monday/thursday but some people say to run it in pct. Personally I'll run it during my cycle.
its good to run it at 250 iu twice per week all the way up until pct that way it keeps your men on stand by for when pct starts
Mine is 5000iu powder in a 2ml vial. It says to add 2ml of water. Is this right or should I reconstitute with 2ml and then add to another 10 ml vial with a further 8ml of water?
5,000iu in a 2 ml reconstituted with 2 ml should be 1,250iu per ml so that would make 625iu per 1/2 ml and 312.5iu per 1/4 ml. Or you could always reconstitut it with 2 ml of bac water then transfer it to a 10 ml vial and add the 8 ml to make it 500iu per ml.
Close, 5000iu reconstituted with 2ml = 2500/ml
Use a slin pin full, 1ml=1cc, to reconstitute. Each 10 on the slin pin will be 500iu, half way to the 10 will be 250iu. It makes it easier.
Yep, thanks for catching that pat. I guess im on crack lol. I divided it one extra time.
AnonLol it happens. A for effort bro