posted Wed, 06/11/2014 - 10:11
3209
Which syringes to buy
ad
First off I apologize if this topic has been covered in previous posts. I am new to aas and have done a ton of research on the compounds, diet, PCT, etc. the cycle I am planning is test cyp (250 mg/wk) and Anavar (25-50 mgs.day). I need to buy syringes for the oils. I have heard that 18g is good for drawing the oil from the bottle and then using a 25g 1.5 inch needle to administer the oil. My question is this. Which syringes do I buy? Do I buy the 18g syringe and needle and the 25g syringe and needle? Or can I just buy the 18g needles and the 25g syringe and needle and just replace the needles on the syringe after drawing the oil? I hope that made sense. I really just want to know exactly which needles and syringes to buy.
- Bookmark
- 0
- 0
My doctor gave me 19g to draw and 21 to pin. The bottle top leaked and pin wasn't nice. Definitely 21 or 22 to draw and 23 for pin. Feels weird at first trying to push your gear in standing there seems like it takes forever but way better option I use 1in.
First cycle, one compound... and did you mean you're taking 500mg /2?
And moving on to your question.. for my first 4 cycles I pulled and pinned with a 23 ga 1.5"... never swapped the needle... now I pin more often and the 23 ga can be painful overtime, with the scar tissues and the tenderness from repetition injected... I would buy either a 18 or 23... I prefer 23, 18 can rip the stopper and ruin the gear... and I like to swap and pin with a 25 ga, no matter what muscle group I pin.
Hitman187for larger muscles like quads n glutes 23-25g 1"-1.5". for smaller muscles such as delts 25g 5/8, and for drawing 21-22g. i have 22g needles now and with thicker oils it still takes a lil time
Hitman187for larger muscles like quads n glutes 23-25g 1"-1.5". for smaller muscles such as delts 25g 5/8, and for drawing 21-22g. i have 22g needles now for drawing and with thicker oils it still takes a lil time
In my experience
18g ruined my stopper, to big and will core out rubber, leading to contamination and ruined gear
I'd stay away like said below 22-23 does the job just fine
rocketballzThank you guys. Answered my question perfectly.
Buy the syringe complete with 18g needle then loose pins of varying lengths and gauges as the body part you are pinning might require.
See the pinning guide for ideas on needle sizes. Look in the info tab in the left navigation.
http://www.spotinjections.com/index3.htm
The site also shows you how to inject each muscle group.
Bro, drop the anavar on your first cycle and run what this community recommends as a first cycle - 12 weeks of Test E or Cyp at 500 mg / wk. You will also need an AI and PCT chemicals. Please do some research with the magnifying glass up on top on starter or first cycles. You should be able to figure it out - come back with a proposal - actually u can post up a proposed first cycle in the cycle-logs section of the website for review.
I've used both 18g and 21g for drawing both are big enogh so it doesn't take forever. I Actualy ran out of my 21s so I had to draw with a 25 yesterday and holy shit did it take forever lol. So by either 18-21g needle and syringe and then just buy a bunch of 25g needless you don't need the whole thing. Then after you draw with the Bigger pin just take it off throw it out and put on your 25g tip and do your injection. Obviously follow proper protocol regarding being sterile.
Get separate syringes, and needles. Draw with a 22 or 23, switch out then pin with 25. I personally think 18's do to much damage to the stopper. Even 22 and 23 will tear the tops up after a while.
What are your cycle details? Length, estrogen control, and exact PCT.
Mr KfizzleMan I tried some 25ga not too long ago and have always used 22 or 23 ga. That 25 took FOREVER to pin. It was a quad injection. I decided to stick with the 23 ga. That's just my experience tho and what I'm used to.
Yea, I switched from 23 to 25. Def takes longer. I think it just goes in a little easier. I heat my oils up first which helps a little. 23 to the glutes isn't bad.
rocketballzI am planning to run a 12 week test cyp cycle at 250mg/wk plus Anavar at 25-50 mg ed. I've only used orals before and am a bit nervous about the whole thing. I am very prone to gyno so I want to start with a low to moderate dose of test to see how I respond. I have letro, adex, clomid, and nolva on hand for estro control and pct. Any other suggestions? Should I just run the var alongside the test? I figured I would keep the var to about 6 weeks.
I wouldn't run the Var, just Test. Do a cycle with Test alone so you know how your body is going to react. If you are gyno prone like you say then start your A/I around week 2 unless you notice sides coming on sooner. Have you researched the proper dosing for the A/I's you have?
rocketballzI have, thanks man. I posted my cycle up on the cycle page. Based on the suggestions of some guys, including yourself, I'm doing a 12 week 500 mg/wk test cyp only cycle. I've got adex, letro, Nolva and clomid on hand. I'm gonna mix in some HCG towards the end of the cycle before I start pct.
Good deal man. I don't check cycle logs enough, but it looks like you got the answers you were seeking. Should be a great cycle if your diet and training match. +1
gave myself a thumbs up by mistake, negged it to correct