posted Wed, 08/31/2022 - 20:34
851
HGH- cloudy or something else
ad
I did take a look through the recent post on cloudy GH but this seems a bit more than what I'd consider cloudy. I don't have a lot of experience with HGH so wanted to post some pictures and see if you all would use this. I did contact the seller, they had me give it a few water baths in 50 Celsius water and asked me to shake it a bit. I have mixed a vial with BAC and one with sterile water from a local lab, both are the same results. Vendor advised the product was fine to use and offered to refund if I sent it in for lab testing and there was issue.
would you consider this in the cloudy HGH realm or possibly a different issue?
- Bookmark
- 0
- 0
No good, should be crystal clear
First thing is you don't cook your GH, so that bottle you might as well toss. It is no good even if it did clear up. If you are sure you didn't bust the puck up by spraying the water on it then I personally wouldn't use it. GH should be crystal clear like the water you put into it.
That almost looks like there is some sort of sediment. Could possibly the binders or something but it looks sketchy to me. Let it sit overnight and see if it clears up.
Thanks for the input. Yea I don’t think it has to do with the water hitting the puck directly. Sitting overnight it just settles to the bottom
RustyhookerWater hitting puck directly DESTROYS the hgh.
when reconstituting you don't spray the water directly into the powder block/puck because if the water goes directly into the powder block/puck the water will end.up cloudy like this. Make sure the water goes softly down the wall of the vial.
Appreciate the comment. The first vial I will say that could have been issue as there was more pressure inside than I was expecting. Second one I was expecting it so had a better grip on the plunger so it didn’t get sucked in quickly and the needle was against the glass
This happen to me the first time as I didn't know it was going to pull the water from the plunger so hard, but after that I learned to Grab the plunger before it shoots out too fast... The person below has a good idea to put a little air at the tip so you have time to grab the plunger and face it away and slowly let it release the water... wish I would have learned/thought of that before my last vial...lol gl bro
A little thing I do when reconstituting, when I put the water in the needle I pull the plunger back a little so there's some air before the water at the end. Then when I put the needle in, hold the plunger as I poke it through the stopper, but since there's a little.bit of air at the end instead of the vacuum pulling the water in it sucks the air in and then I can let go of the plunger when I know the needle is pointed at the wall of the.vial. I hope you understand what I am trying to explain lol
Thanks for tips and yea it made sense. Gave it a shot but no luck even with some air in first.