ScorchedEarth's picture
ScorchedEarth
  • 77
990

Whats the Smallest gauge/compound you have used

ad

I am just wondering peoples experience with what compounds and gauges they use for injection. Smallest I personally have used is a 30g. And the largest I have used is a 22g. I have had test e, test prop, tren e, tren a, test suspension, deca all fit through a 30g. You do need a lot of patience though because itll be a minute before it all goes in. Please share your experiences with compounds, gauge size and injection site. And any preparation you may personally use like heating techniques etc...

ironace's picture

I just started a cycle this evening all long esters 400 test e, 400 eq, 300 tren e total size was 3.5CC I used a 23g- 1" in the glutes. No pip thus far shot it almost 3 hours ago, been laying down (lol) No heating, no advil, straight up. I did shower like flash and sterilize the area i use to put all the goodies and equipment necessary for the procedure (don't want to deal with infection)

IrishMack's picture

biggest I used was 20 gauge, looked like a fkn straw, smallest is my new favorite, slinpin. If you use pharma, it will flow through the slinpin.

ScorchedEarth's picture

what gauge slin pin? i have 28 and 30. both work but its slow as dog shit

Bigs251's picture

Personally I prefer 1 inch 25 gauge for larger muscles and 25 gauge 5/8 for others such as triceps

ScorchedEarth's picture

i just bought 25, 5/8s. for things like traps chest maybe lats if i really need a spot. been going ok so far

Bigs251's picture

Oh no man those are big muscles you need an inch especially in the lats. Chest I do an inch as well tris bis rear delts and shoulder ill use 5/8

ScorchedEarth's picture

Thanks for the feed back. I like to hear other peoples opinions

TheFlash85's picture

23g 1inch is what i used for 8yrz delts, quads and glutes, im very fanatic with hygeine and sterility, always shower before injection, pure soap, rinse, body wash, rinse then antibacterial pump soap on the area im going to pin, rinse, dry off, wash hands with dettol- 99.9% kills germs, pull out gear, swab all vials twice, open new barrel and pin, draw up oil, cap carefully, dettol hands again, swab injection site 3 times, inject, pull out, swab twice, bandaid, done, no rubbing or massaging, if i have a bit of pip, hot water bottle and a couple of advil, done. short esters i rareley use, i sometimes heat oil first, it helps a tad. tedious routine? maybe but cellulitis and staph can kill you! my dads in icu rite now with both, he has to have heart surgery in the morning due to it spreading through his blood, the bugs have started eating the wall of a valve in his heart, he will be in hospital for 4 months minimum, his organs are failing and hes pissing blood! its serious shit, i cant stress it enough.

ironace's picture

Flash - Great technique... very OCD but it works. Just a general question... say you do slin or HGH say 15-20 minutes prior to workout and you can't pin in the office due to distance to the gym and obviously can't pin at the gym (what would your ideal sanitary approach be?)

TheFlash85's picture

for me personaly? it would be eating a massive steak with a pile of mashies and veggies and gravy, id time it just rite for the ride to gym, id then have a few shotties of no xplode and crank the beats in the car on the way pump rite up. fk slin. been there done that. not interestd anymore, unless your pro dont bother.

ScorchedEarth's picture

Thats my routine pretty much down to the t. Super sterile. Always cleaning. But I've recently been experimenting with smaller gauges. Been using 22s. Then went down to a 23. Been doing ed shots so been using either a 28g or 30g slin pins. But I have bought some 27s for my 3cc plunger. So im wondering what other people have experimented with gauge wise. Bc my only concern is scaring over the years. I do heat up my oils which I beleive helps a lot injecting into the muscle and pip. But I think decreasing the gauge will also help with scaring

WanHungLo's picture

i find 27's to be a nice balance - small enough to be close to the size of a 28 or 29 slin, but large enough to not take farking forever to push the oil through (but its still slower than a 25).

i'm also not a fan of the amount of pressure i have to put on the plunger to use a slin..;just makes me uncomfortable bearing down on it while it's sticking in my body.

TheFlash85's picture

yeah, im using 25s now, it helps, my delts are full of scar tissue.