500mg Test E with 300mg/mL??
Ok so I was really trying to avoid starting a new thread here but my research has led me to a dead end.
I'm working on setting up a 12 week 500mg/week Test E only cycle. One problem i have run into is that many sources only carry 300mg/mL test e. i'm not 100% familiar with syringes but i dont really see how i can break that down to a 250mg shot. I have however ran into a source that sells 500mg/mL but im concerned that half a mil is too small to pin? (stupid question?)
so kinda weighing out options here
run 600mg/week?
or 500mg (using half a mil per shot)
or somehow calibrating in 250mg from the 300mg/mL
Thanks for taking the time to help a bro out..
additional info :
i'll be using a-dex on cycle .5mg eod
starting pct 2 weeks after last dose of test
clomid 50/50/50/50
aromasin 12.5mg ED weeks 1-4
28 years old
4+ years lifting
5'11'' 190lb 11%bf
- Bookmark
- 0
- 0
Rustyhooker1.5cc is 450mg. 3/4 mon...3/4thur. Or just hit 1cc mon and 1cc thur. First cycle you'll grow fine on 450.
lol 100mg isnt that big of a difference u wont notice it. and the simple solutuon is draw a little bit less than one ml into the syringe, its not rocket science bro
Doing 500mg/ml would give insane PIP im sure. Thats propably supplied with the intension for you to water it down with something
56tooThe simplest way is to use 250 mg test which many of us carry. Regardless on a syringe, or at least a 3cc syringe (which most of us use) every line is a tenth of a cc, so in the case of 300 every lines value is 30cc so if you fill up to the tenth line you will be pinning 240cc (30cc per line x8). You can run it a lil past the line to get the whole 250 cc . It wont kill you if you happen to go a lil bit over or under. You'll be damn close either way
You could do a shot of 300mg every 4 days. That would put you at 525mg per week.
Thats an interesting approach. levels should be pretty steady im assuming..
If your test e is 300Mg/ml, keep it simple
1ml twice a week.
Just run 600Mg/week no biggie
500Mg/wk would shut you down same as 600Mg just run proper pct
My $0.02
Best of luck bro, keep training hard/smart
waltrNothing wrong with a half ml shot.
But just for your own knowledge, 250 mg/ml / 300mg/ml = .83.ml - that's how much you'd need of a 300mg/ml product to get 250mg. Getting .83 of a ml would be easiest with a 1ml syringe due to the larger number of hash marks telling you exactly how much of a ml you've got in there. Could be a little tricky with a 3ml syringe though.
Can I suggest a better PCT?
Clomid: 100/100/50/50
Nolva: 20/20/10/10
Aromasin 12.5/12.5/6.25/6.25
Above are daily and by the week.
ok, yeah i wasnt sure about the half mil - logically it shouldnt make a difference but idk. thanks for your input!
yeah ive been nulling around the idea of using both clomid and nolva - this seems to be a popular dosing scheme..
and how could i forget to taper that aromasin? good call my man.
and thanks for that breakdown, i'll most likely be using a 3cc since i thought 1's were all slin pins?
waltryou can get other ml size syringes, you just gotta look for them
There's plenty of sources that sell 250 bro but if you want to know how to break down your dosage you take the hash marks on the syringe typically 4 marks and divide that into your dosage amount. In this case 300/4=75mg per mark. Now divide 250/75=3.3 marks. There's no way your going to hit .3 on any syringe so you will have to do 225 per shot or just do 300.
thanks for your reply -
math looks good - you guys are making me look like a fool haha..
is there going to be a pretty big significance between 500 and 600mg?