posted Mon, 01/02/2012 - 00:08
2523
+ 1 mixing gear?!
ad
hi guys, so ive got some test e 250mg/ml on hand from a source, dont know if im allowed to name labs so i guess i wont, definitely legit, just that the pip fucking hurts so bad! so i was thinking would it reduce the pip or anything if i were to mix 10ml of the test e (the ones that i have), with another 10ml of another brand of 250mg/ml test e, and get 20ml of 250mg/ml of test e in the end. my question is, lets say the carrier oils in the 2 brands are different, would it result in my 20ml mixture of test e being seperated due to different density of the oils, or would it mix evenly even if the oils used were different? any feedback is appreciated, thanks!!
- Bookmark
- 1
- 0
AnonI personally like to buy a bunch of different kinds of oils..tren, mast, prop, deca.. put them all in one big ass olive oil bottle (sometimes I even add a little olive oil for the hell of it) then I pin EOD at 500mg... helped me grow my 12 inch biceps I'm so utterly proud of. ahhaha
TxBigBoyAh the age old question of mixing gear. A wise man once said "thou shall not mix thy oil with the brand of another man"
dude was that not on the valvoline commercial lol
HAVE YOU LOST YOUR FUCKING MIND???
That's a good way to buy yourself a long dirt nap.
The guy down the street from me tried mixing oils, and the resulting explosion leveled his entire house. This ain't like mixing corn with your mashed potatoes. This is serious shit.
BE CAREFUL!
limejellyjamcomment deleted, user has at least 22 fake accounts
~BFG
I have found that if you mix in some unfiltered apple cider vinegar at a ratio of 1:1 with the oil mixture and then microwave the syringes (the hotter the needle, the less the blood afterwards because it cauterizes the injection site) until the oil inside the barrel is bubbling, you get absolutely no PIP and reduce the chance of explosion
AnonBro! I read the "HAVE YOU LOST YOUR FUCKING MIND"??? and figured you were talking to me.
While I am here I always use different syringes and when running 16 compounds that is simply 16 pins. These Brahs need to learn their shit. Exploding syringes kill people!
tread-mThank God I was not home when that happened. I had mixed all that shit up and left to find some 2 gauge pins to draw with and 40 gauge to pop with...I'm very afraid of pip! I did watch a Willie Nelson video and he suggested mixing ethenol in the mix too so I did, that may actually have been the problem, he was blazin pretty heavy on the video and looked pretty baked but hell its Willie, eeerbody listens to Willie...right? I was still singing "on the road again" as I drove off and heard the BOOOOOOOM! I was baked too so I just thought my amp was gettin it done today! Later I thought,,,oh, thats what all that debri falling on the car was....hmmm. Thank God my weed was in the car bruh! Anyway, mark my word, I will win that Body Challenge on weed and creatine alone so get my gear ready bitches!!!
I can't believe nobody said anything to you about calling people by their real names on here. now whoever Mark My Word is will probly have to move in fear of getting busted. I expected a lot more from you tread lol
OE2000Ive experiment and have found grapeseed oil works for me, no pip even from prop ~~~ also, as Nate said, cottonseed oil is great too!
To eliminate PIP for me I split my injections rather than add more oil. For example instead of pinning my quad once and being crippled for the weekend I pin it 3 times so the crystals aren't concentrated on one direct spot. Hope this helps.
TestE has a melting point below that of normal body tempature, crystals shouldn't be much of a problem.
Nasty81NateJust get a 40ml vial of cottonseed oil to cut it with, it's cheap as hell.
MultipurposeYou could mix in syringe. Do half and half for each injection.
limejellyjamcomment deleted, user has at least 22 fake accounts
~BFG
Have a crack at this. I am not 100% sure it will work. Draw the whole lot out and then push it back in through a watman filter. There may well be some of the base still not totally dissolved in the oil. It's worth a try. A watman only cost a couple of bucks and a 10ml syringe less. I would try that before I tried to re-heat it and dissolve any base that may be in the mix. Have a look and make sure it's clear as well with nothing floating around in the vial.
limejellyjamcomment deleted, user has at least 22 fake accounts
~BFG
No probs bro I really hope it works mate. Can you let me know how it turns out.
limejellyjamcomment deleted, user has at least 22 fake accounts
~BFG