Hey guys! My name is Frank and some of your probably already knows me from other boards. I am Pharmacom Labs employee and manager of Basicstero.com store.
Ace-Basicstero is my colleague and assistant here! If you have any questions regarding our products I would be glad to reply them!
As you can see Pharmacom Labs has lot of stores and resellers. Here are presented 2 stores - www.pharmacomstore.in, which owner is Darius. This is one of the oldest distributors of Pharmacom Labs.
And another store is www.basicstero.com - this store was founded a short time ago, a half year ago actually on the initiative of Pharmacom Labs company head. It is supposed to be kind of a direct Pharmacom Labs store.
But in any case both stores offer the same product and it is clear you can place orders in any of them, it is fully up to you! Products are absolutely the same from the same production line!

Also let me introduce you a small article why you shall chose Pharmacom Labs and not any other brand!

Why choose Pharmacom Labs? Or what do other manufacturers hide from you?

1. Oil, by nature, contains small water particles. When present in the cooking oil you use at breakfast, there's little need for concern. But those same water particles present in an oil you are about to inject present a far greater problem. You might know what can happen if you attempt to mix 1ml of oil and 1ml of water for injection. But that's only the beginning, the water itself is also a very good medium for bacteria to reproduce - in stark contrast to sterile oil. Therefore we put great care into oil dehydration to minimize all potential health risks, however slim. Many cheap oil based steroids cannot offer the same guarantee. Pharmacom Labs remains one of the few manufacturers that can offer these measures with high-performance equipment at a decent price!

2. Are you aware of how and under what circumstances the labs you know of filter their final products? Syringe filters are often used in lesser quality labs, but they are not reliable; a proper filter would need to be at least 22 micrometers as a minimum. If you imagine the process of sieving oil through a filter of an average size to meet commercial demand, you would need at least 600 kPa of pressure. This is simply impossible without sufficient equipment, custom fit vacuum pumps or compressors designed for pharmaceutical use, a pressured air dryer, a large quantity of filters including cyclons. No labs selling cheap products possess this cost prohibitive, professional equipment.

3. Do you know if and how other manufacturers avoid double bond (olefinic bond) sequences in ethyl oleate? How they avoid fast oxidation?

This olefinic bond is the cause of a so-called "unsaturated condition" of EO - all unsaturated acids are highly attracted to all olefin-type combination reactions. Most labs use standard vials and rubber caps purchased from ordinary online supply stores. But ethyl oleate as a solvent can react with rubber causing its oxidation. With time, as you might have guessed, the rubber degrades.

So we ask - how many manufacturers use a non-toxic, hypoallergenic thermoplastic rubber which additionally mitigates this shortcoming? Are they even aware of it at all?

4 Plenty of labs will be quick to tell you they use benzyl alcohol as an antiseptic agent, but do they know that it is truly only effective under very specific, controlled conditions? One of the strongest conditions being the pH level of oil - benzyl alcohol loses its antiseptic efficiency at a pH <5 or >7. Do they have the capabilities to control for this? We have our doubts. If you use a cheap testosterone product from a lesser lab, your bloodwork may indeed reflect that it contained active hormone. But we ask you, what could happen with longterm storage of such a product?

5 What preserving agents are other manufacturers using against gram-negative bacteria - if they are even using them at all?

Benzyl alcohol, while effective against gram-positive bacteria, is not sufficient against gram-negative bacteria which have a thicker cell membrane, making them resistant to not only BA but many preserving agents in general. While we cannot disclose the specific technologies we use as part of our production secret, we guarantee we have the means and the will to use them in our oils.

Neglecting the use of parabens, chlorobutanol, and other such agents clearly implies clandestine production, typically with the intent to sell as many products as possible with minimal expense - no longterm strategy of precautions thereof. Whether or not a customer intends to use a product two or three years down the road is certainly of no concern to them, which poses a serious question of concern to consumers.

So we have to reiterate: we have the industrial scale equipment and the technical prowess to ensure all of these standards - and plenty more we cannot disclose. But with that comes a greater cost than what you would find in lesser clandestine labs.

You can say Pharmacom is expensive, but we can't agree with confidence that it really is. Ultimately, everybody has a choice - to buy or not to buy. But our established record of over 10 years and the professional quality we possess compared to the multitude of issues and infections found in smaller, cheaper, shortlived labs speaks for itself. Is it worth a few extra dollars?

Guys, i have great news!
hey guys. All is easy. From now and further we are going to send our raws and final products to an independent lab to show you, that we produce high quality products. As far as I know no one lab has ever done something like this before!

We do it in fact only for you, our potential customers. Because we have our own internal tests, but they are in Chinese and not all trust them. I published them as well on our other boards not once. But lof of members did not trust. For this reason we decided to start using an independent lab, which is GMP certified and which provides verifiable results!
A while ago we have sent 20 samples with our raws to the swiss lab Simec.
Yesterday I received first result of our nandrolone deca. We tested purity of raws this time.
Here is the result
http://imgbox.com/n5TRuwO0

Our nandrolone deca showed the purity 100.7%. It is by 0.7% higher as the purity of the certified pharma grade reference sample used by independent GMP certified lab as standard. Laboratory first tested the certified pharma grade reference sample. It was considered as 100%. After this Simec tested our sample. The closer result of a second sample to the result of a reference sample the better. It turned out that our sample is even purer as the certified pharma grade reference sample. In other words our deca is of pharma grade quality. Simec virtually confirmed it in correspondence.
Results is verifiable. You can contact Simec, provide them test number and they confirm it!
Waiting for other compounds. To be continued...

By the way. another independent project anaboliclab.com tested our oxandrolone and it turned out exactly 10 mg as manifested!
http://anaboliclab.com/lab-results/brand-name/pharmacom-labs/pharmacom-l...

Also all who hasn`t seen our production process and technology details please visit this page! You will not regret about it for sure.
http://pharmacomlabs.com/innovations