posted Thu, 05/09/2013 - 08:48
3194
Need to pin 1-Test Cyp separately???
ad
I have heard some people say that 1-Test Cyp should be pinned separately and not mixed with other oils and others say that it doesn't matter if you mix them in the same pin. I don't see why it would matter if you mixed it with test and pinned them together. If there is a valid reason not to pin them together, could you please shed some light on why they shouldn't be.
- Bookmark
- 0
- 0
I mixed 1-Test Cyp with other oils. If I got less of a result I didn't notice4 it compared with other reviews.
How was the pip?
Honestly I didn't have any but a buddy of mine had a lot.
Talked with Muta and he said it shouldn't be a problem mixing the 1-Test with another oil.
Buildbigger86That settles that then. If muta and viking say it wont be a problem. Then i know it wont be a problem!!!
I see no reason why not either... what I will add here that may be of some help I had a conversation with muta not long ago.. he explained that 1-test cyp is THE hardest compound to keep stabilised soooooo... my logic tells me if hard work as been done to keep the product stable why risk adding a different solvent base that may upset the whole balance of this complicated compound... personally with this knowledge on hand I would pin separately to keep it stable and pure.
Have a chat with muta for a deeper knowledge base on this stuff.. he is easy to chat with and will give you real-time facts.
AnonYou are dead on, Dennis. (LOL inside joke)
1-test has about x10 the volume of any other raw ive come in contact with. Tresto (MENT) is just stubborn because the ester is like little stones that refuse to dissolve. A lot of factors come into play... the chemicals required to have it remain in suspension, although cut down to the bare minimum, are still pretty Hefty. Doesn't bother some people, others swell up!
true statement. If you're pinning only my oils your chems will remain in unison, per se.. but if you're using multiple suppliers, you're looking at one hell of a cocktail, depending if they use EO, or what carrier, etc. So starting out, I might even say start at 1/2ml and pin it in the glutes or the least pip-prone muscle you have to see how your body handles it, and from there - explore the possibilities!
Buildbigger86Whoa, the section you have mentioning the mixing of oils with a different sources finally has been proven to me in a sense. What i am trying to say is i mainly on run muta's gear because let's face it, it is absolute fire but anyway i have mixed his eq cyp with his test eth 500 together and have never had pip i have also mixed his eq cyp with test eth 300, also mixed his Npp 250 in the eq or the test. Whatever you get my point.
But recently i ran out of his test i have been running another top source's test cyp 250 but when i mix the oils together i get different reactions with whatever muta compound i am mixing it with. If i mix his eq cyp which is a nice thick oil with the other test cyp 250(NOT MUTA'S) i sometime get pip from it or get a little swollen ball nothing crazy, but none the less i still get it. Where as when i only run muta's gear what ever compounds of his that i am mixing together at the time i never ever get pip. So his statement full answered my question i had in my head for a while now
So Thank you for knowledge on this one
Edited by MOD.... cant allow source promotion in open forums.
Calm it down big dog... check the rules, don't let your excitement run away with you.
Buildbigger86Sorry Viking i was placing my opinion but not after re reading looks i am promoting his gear and not on his source review page. I will go back and edit now.
Oh of course you were open step a head of me and did the edit for me.
Aye... that's my job!.... changing my name soon to "THE CARETAKER"
Here we go..... check this out guys!... stuff like this is why eroids is #No1... who else can get deep inside information like this shot straight from the hip.... fkn amazin!!!
THANK YOU MUTA MY BROTHER FOR SHARING DEEP INFO LIKE THIS..... A1 BROTHER
Thanks for clearing that up Muta. Stick with your gear and there shouldn't be any problems:)
Thanks. I'll be running his gear so I will touch base with him.
cool brother.. that's the way to go tell him I sent you then you get his full attention ok
AnonHe said "VIKING" sent me... I said, you mean "DENNIS WOLF?"
he seemed a bit confused ;)
I dont care what anyone says, I think you should bring back "theviking1" old school!!!
Hahahaha... its the hairstyle right muta lol.... no wonder he was confused!
"theviking1".... not many left on here remember him brother I bet?.. yes we go back a bit you and me,time stands still for no man.. not even for us immortals lol
Competing this weekend bro I will have some nice pics up next week of the "wolf den" hair cut just for you
Buildbigger86Thank you Viking, I start running 1-test in 2 weeks. So you have saved me from having to take a day off of the gym because i am limping on side and looks like i lost part of my hip lol.
Plus 1 for sorting this out for me
Mix it, no reason in aware of it would be a problem.
I'm curious as to why someone would think there would be?
Me too.
RustyhookerYou can mix anything oilly. If its got pip...blending usually erases the pip
Buildbigger86Rusty i must agree with you on that blending helps the pip. But 1 time my friends mixed a certain sources test's i provided them with(good source by the way not some shit one) and they mixed it with HG Deca and all 3 of them had horrible pip from for like for first 6 injections. It was so odd to me. At the time i was running the same test as them and mixing it with EQ and i have NO pip what so ever. So from what i learned from this experience is that even if your mixing oils and still getting pip. The 2 oils just way not combine well. After 3 weeks of have them bitch i told them to not mix the oils. Inject deca solely alone and test solely alone and BAM. They never had pip again off that batch. Just if this continues for you with pip try not mixing the oils and see if PIP stop's.
Plus one for the new knowledge received form you my man!
No1you can mix them i mix test e and deca all the time
Wardi77As long as the compound you are mixing it with is oil based, you should have no problem. I have heard that 1-Test Cyp is somewhat painful, so mixing it with other oil like test e might minimize the PIP. You obviously wouldnt mix water based gear with oil based, but as long as both compounds are oil based you should be alright.
Buildbigger86DONT NOT WORRY fellas, i will running1- test cyp for the first in 2-3 weeks and will right full detailed forums on it and my progress i achieve from it. Ward i want you on that 1- test cyp my man!!!
Yeah, that is what I thought. I just don't know where all this talk about having to pin it separately is coming from. It would literally be a pain in the ass if it had to be pinned separately.