+ 2 Promo TD Osgear
Test E 400
Cialis
Accutane
I planned on running a full cycle with this and getting bloodwork but I'm not sure I can. The fluid in the test is yellow brownish. Is that normal? That's not even the problem. I did a 0.5 ml shot in my delt and I have had the worst pip I've ever felt in my life. About 3 inches all around injection site is very painful. I can not lift my arm. Been using a heating pad fire 3 days and van lift no weight on that arm. The source gave me tips to try to help prevent this so I will give it one more shot. But if this happens again I will be discontinuing the test. I will still review the Accutane and Cialis. Regardless thanks for the promo. Much appreciated. I will update in time.
Edit: Just want to confirm I did another shot in my glutes, 23 g 1.5 inch. Zero pip next day. I believe I didn't go deep enough in my delts. I'm going with user error. Nothing wrong with the product.
- Bookmark
- 2
- 0
Update. I used your suggestions. I pinned in my glutes 23g 1.5 inch. I heated the test c up first. Just put it in warm water for a bit. I injected slowly and made sure I was seep in the muscle. Zero pip next day. Next time I do delts I'll go deeper just to experiment. But I'm going with user error on this. Absolutely nothing wrong with this gear. Thanks for suggestions.
I suffer from pip with quite a few brands but zero from this one. It’s gtg
Bro, solid lab … can’t go wrong with OsGear as well.
Smurf’s got a point though. Personally, I’ve never had any PIP from 400mg Test E, but I rarely pin it alone. I usually mix it with Mast, Primo, or sometimes NPP … all thick oils.
Even then, I never get lumps or pain, so I really believe there’s a personal biological factor at play. Some guys are just more prone to PIP than others, no matter how clean the gear is.
Thank you for the TD picture!
"This was my first time in delts with higher concentration oil." -> that's problematic and even if you inject 0.5 ml it still has the same concentration. @smurfdude1234567 gave the proper advice below. Make sure to dilute it because injecting a high concentration oil in a "young" muscle leads for sure to serious PIP and lump. On our website - description section of the product - is specified this aspect.
Like I said I was never trying to say the gear was bad or at fault. I was more looking for advice and I have never seen test this color so I was just curious. I know you guys are well reputable and I'm certain your not selling bunk gear. I fully intend to use all advice posted here abd continue on with my run using this test e 400. Will update and I plan on getting bloodwork after 4 weeks. Thanks again for the td on this promo. It is much appreciated!
These are proven good products for a long time now. Have never personally had an issues especially with this manufacturer from the source stated.
You are using a 400mg/ml test- bound to have pip in high dosages. Try something like 200mg/ml, or split it with prop or other lower doses compounds. 200mg of test in 0.5ml of oil will hurt- especially newbie muscles
If you don’t have anything to cut it on hand, you can even buy sterile MCT or GSO at lots of sources for VERY cheap ($5-$10 a vial) and use that to cut down the dosages in stuff.
Yes. The “brown” is just fine. You will see compounds everywhere from clear like water to orange to brown to almost red…. Oxidation, heat, compounds themselves, types of oil, and many more factors all play into that. Just wait until you see winstrol water or test suspension- looks like milk in a vial haha!
I can almost assure you that the gear is not dirty. This is most likely a case of newbie muscle with high doses gear, and/or injection technique mistakes (gauge/depth/speed/temp/etc.)
Heck I just did a shot of the same exact stuff from the same exact source just to kill off a vial that has been uncapped for probably close to 2 years now. Absolutely no PIP, but was mixed with some lower dosed E, and TNE.
I have test p 100. I was just trying to give an honest and accurate review with bloodwork. Figured using another companies product would not make it a reliable review. And I'm having a hard time finding sterile mct oil. So you think I didn't go deep enough? I used a 25 gauge 5/8. I've used that many times no issues. I also have 1 inch for my delts sometimes I just like the shorter one. I read for that high of a concentration I may of went to shallow in the muscle with the 5/8. And far as color I was just curious. I've only been using about a year now. Still learning. Not trying to discredit the source. They have been very upfront and helpful and respond to me extremely fast. I will be trying my quads next, 1.5 inch. Then hopefully I can dilute it before I try delts again. I'll also get the warning method. Have had several ppl suggest that. I've tried test c300, test blend 400 and sustanon 500. Never had this happen. I'm sure it was user error, like I said Im not knocking this company at all. Just looking for advice really.
Thanks for the info man. Much appreciated!
Oh yeah i completely feel ya and wasn’t trying to come off as bashing you my man. Just stating that over years and handfuls of orders & promotions I’ve personally never had a problem with this product, brand, or SRC.
Some guys are all about the new SubQ oils or shallow IM. I’m assuming you have some muscle mass. I like to ask guys to hold the needle beside their muscle and see how deep it’s going in- not very. I use 1” for delts, traps, Bi’s, and the smaller muscle groups then 1 1/2” for Quads, Lats, and the larger muscle groups.
Oils just always absorb and have way less issues for me the deeper into the muscle I inject. My thought process and understanding has always been more blood vessels (muscle) = faster less (fat) = slower. When I try to use slin pins or anything under 1” I always run into similar issues and end up with a golf ball on me even with tiny (like .3ml) TRT doses, so I’ve given up on trying to use slin pins and short/tiny stuff expect for peptides. I find the more shallow the needle is especially with any real amount of volume there is going to be some oil pushed back up the track and SubQ leakage occurs with can cause inflammation and infection in some cases. I inject into some weird spots and am a little paranoid and better safe than sorry so I aspirate, but that can contribute to PIP if that’s a sensitivity.
If you don’t have the issue with other higher dosed compounds and have been injecting for a year with no issues I could definitely be wrong. There is always a possibly, but seeing bad test is rare even in the current state of the market. Did you notice anything that was different about this injection compared to normal (blood, leakage, shaking, pressure while injecting, etc.)?
I gotcha and of course man! Apologies if I came off harsh.
Your good man I didn't take anything you said the wrong way...I will say there was some leakage after now that I think of it. So I almost guarantee I didn't go deep enough. I'll go 1 inch next time just to experiment and warm the vial. Pretty sure I just went to shallow. The other compounds I mentioned I went quads with 1.5 inch. Maybe that's what I had no issues. This was my first time in delts with higher concentration oil.
unreal89If you only have been using gear for a year that’s likely the culprit. I used to get pip from high concentration gear now everything pins smooth as butter haven’t had pip in 5 years