+ 9 Newbs guide to proper pinning
Ok my peoples this is a guide for the newbs that has questions on pinning..
Take a alcohol swab and swan the top of the vial, take a clean syringe out of the pack insert into the vial draw your steroid into the barrel. Take the needle off the syringe and put on a new clean unused one. Swan the area your about to pin and let air dry . Once dry make a z patten hold and insert needle and slowly inject till needle is empty wait 10 seconds and remove them swab the area where injected.
This will help reduce or eliminate infections from bad pinning practices. Never never skip a step in this and never use the same needle you drawed your AAS with to inject, this will cause all kinds of issues you don’t want.
Hope this helps o answered your questions if your just begging
- Bookmark
- 9
- 0
This has always been best practice for me... Never had any issues. First I'll use a antibacterial wipe on the vial and the area to be pinned. Then I'll swab with alcohol wipes. Cleans the area very well.
FortySIXand2I agree...as the needle is inserted into the vial, becomes dull...the you go to pin in the glute..and it hurts like hell!
Also you have to make sure the swan you use is clean too. Give it a nice bubble bath before you swan the area you are pinning. Sometimes the swan has been out goosing around, you don't want bird flu.
Lmfao! Damn feathers are everywhere! What a horrible idea! Hahaha
Lol ha ha
Saying don’t aspirate?
Every single doctor or nurse I have ever spoken to about this has told me not to aspirate.
My sister is a retired podiatrist. Although she's not exactly the expert on AAS, I guess common knowledge is that there's no need to aspirate. You need like 3cc of air directly into your vain all at once, or something along those lines. In other words, waste of time, and makes it easier for you to pin wrong and get pip. Never have aspirated. Never got test flu, or cough. Oh, and I've never died, truth!
I think this has been said before, but you dont aspirare for fear of inyecting a harmless amount of air.
You aspirate to ensure you didnt hit a vein, because if you pin test in the vein, it gets wasted. When we are cycling we aim to make the most of our gear, its expensive and its hard to obtain, so you maximize your results any way possible.
A nurse putting an injection doesnt aspirare because she doesnt care if some of the substance hit a vein a gets lost because usually they are injecting a medicine to a patient, not roids to a bodybuilder that cant afford to lose some test
JayD718Yeah, you're right, but injecting your shot into a vein is dangerous anyhow. But, many people think that injecting a few bubbles of air is going to kill them. Actually, it takes a lot of air directly into the carotid artery to harm you!
However, I still like to aspirate every shot, because like I said in another comment, there's actually a few ways you can harm yourself by injecting into a vein or blood vessel. You can collapse your vein, cause a blood clot, or even worse. I'd rather be safe than sorry!
Pics or it didn’t happen
Hahaha
Just gotta have faith...
JayD718Actually, it's quite a bit more than 3cc's that's required to kill you, but that's besides the point! That's not the only reason to aspirate your shot. There's other possible dangerous complications that can arise from injecting into a vein or blood vessel, such as blood clots, collapsing a vein, or even more serious complications like stroke, and heart attack are all within the realm of possibility! It makes a lot more sense, just to take a second, and aspirate your shot!
Aspirating isn't about preventing a load of air getting into a vein and killing yourself - you need a lot more than 3cc to do it also. Its about not dumping a load of Test etc straight into your blood stream and therefore not letting the ester work properly by dispersing the hormone as a deposit in the muscle over time. Or even worse, preventing 1cc of lovely tren ace or stano straight into your lungs.
I don’t I mean some do it’s not a bad idea but I’ve been doing this for a really long time and I don’t see the point but again it’s not a bad idea
basskiller89I stopped also, sometimes I nick the vein for test cough lol
I don’t aspirate anymore either and seems I never get pip now.
I aspirate and have only drawn back blood in the syringe once, alot of blood, so must've been in a vein, in glute. I do my own injections 100% of the time and can't manage to aspirate when doing delts, but I do everywhere else.
I noticed sometimes when injecting delts trying to Aspirate actually moved the pin around. So i dont aspirate there either
JayD718Yeah, I know what you mean. But still, you should always aspirate when possible.
JayD718Yes, I think it's always a good idea to aspirate! But, still very good post!
My mistake once was to have my girl massage my back after injection, and some oil from lotion was rubbed onto and in my shoulder I put the juice in.
Got swelling day after.
Pop some 2mg vitamin C for few days, and was good.
Leson learned then.
JayD718"2mg vitamin C"??
People should spend 10$ on gloves too.
JayD718Very good idea!
Good post. I’ve never had an issue. My wife breathed too close to my uncapped needle, trashed it.
Wife touched my skin, within six inches of the injection site after swabbing. She argued to proceed, needle uncapped the whole time, trashed it.
I think
It’s a good reminder cause we all
Get lazy at some point
Wash your hands also guys. If you have bacteria on your hands. We all do it will easily transfer to the alcohol swab and then to your skin. Pin it and it's in you. Infections suck. So take every precaution you can. And we all know if we see a pimple we pop it. What do you think that puss is. Be safe
JayD718Very important post! Washing and sanitizing your hands, goes a long way in preventing needless infections, and spreading bacteria!
Nice add
Great post GJ as usual. +2 all day big guy. Steaks on me. Lol med rare strip loins with some asparagus.
You opened up
Pandora’s box bro .. I can put away the beef ..
No homo
100% correct this is my exact routine. I pin with a 23
+2. Even longtime trt guys like myself can never hear this enough. Complacency can kill you...
Yes sir.. I remember I got a infection in my pec from being dumb .. never again
What gauge needle would you recommend for these newbs ?
22gauge to draw with
25 gauge to pin with
I remmeber back. Pinning with the 22's
When I pin test suspension I use a 22 but I laugh when men’s say they been pinning with a 21or 22 I always say are you trying to harpoon a whale
Suspension almost always clogs a 25... I heard a guy say he mixes it with an oil based compound in the barrel and shakes it up like vinaigrette and it makes it easier to push through a 25 but I have not verified this practice.
No way in hell lol I’ve tried till I was blue in the face to pin it with a 25 clogs everytime.. I’ve tried mixing it with prop and T.N.E. in oil no go ghost Ryder lol
You just haven't found the good stuff yet boss. Pm sent
I draw with a 25 and recently started pinning with a 30 , last week in delts , quads and pecs and I don't feel anything but i still use the 25 for glutes and draw with a 25 so i don't wreck the stopper +1
This is exactly what I do. Pecs are my fav. I use 30g/1" slin pin. Only use 25g/1.5" on glutes. 21g to draw.
Be careful pinning with 30's. I did it several times no problem then one day I pinned my delt, realized I was tensed whilst inserting needle and relaxed, and when I tried to pull out it hurt like hell, didn't want to come out. When i finally got it out it was bent more than a 45 degree angle, surprised it didn't break. Now I won't pin with smaller than a 27 in delts. I'll use 28 in ventros.
My gear comes with silicone stoppers so there a lot better the the old rubber ones
Mine do as well mate but I guess when I can buy 100 25g for 5euro that's why I draw with it haha
True