posted Fri, 03/02/2018 - 07:54
2505
+ 1 Please help. Pieces of vial top in my bottle.
ad
I have well over a half a bottle of test p left. For some reason from sticking the needle tip in to draw out some pf the rubber has came off and is now floating inside the bottle. The pieces are real small barely visible. Do i have to scrap the rest of the vial?
- Bookmark
- 1
- 0
Defo toss it away mate, not worth it at all for whats probably worth about £10! Imagine how much regret you'll live in if you have to have a cubic inch of muscle removed from your leg when those rubber bits cause an abcess...
Hello Sir,
I would recommend to bin it, not worth a risk.
Regards
Is it really worth it, half a bottle of prop is worth as much as a McDonald’s. An abcess not worth the risk..
There used to be a dom. src. with excellent prop, however he used these red rubber stoppers and they would do that even with a 22ga pin. It sucks but at least it was prop and not top shelf primo.
Yeah buddy trash that shit!
I never use anything bigger than 21gauge to draw with
RustyhookerStop the insanity of huge needles to fast load the pins. Learning curve costs cash.
X2, I use a 23 or 25.
I had 2 tiny pieces once and I just transferred it to a sterile vial that bought and a syringe filter. Not really worth the hassle tho
RustyhookerLong ago pip reports were really common. Brewers have done great in correcting issues since.
But nitti wrote a nice forum covering filtering into sterile containers of all his gear. Another cat on here was posting pix of well known gear after filtering. He showed the screen and it was eye opening.
I remember the second one you’re talking about. That was fuckin nuts. I forget the lab now tho.
Exactly I see people saying they pull with an 18g. I pull with a 23 takes only a minute or so no need to rush also a 23 keeps the puncture hole way smaller less chance of something getting in a contaminating it
RustyhookerBingo. Like how fast does these guys need to draw? In such a rush suggests poor sterilization as well. Or as pix posted in the past where dudes quad had open drain. Inside the dr pulled out a barely viewable stopper piece.
Rubber you say ??
Call Stan Lee, he might have a part for you in the next Fantastic Four.
What you need is a mini spike
EDIT: Specifically the one pictured I have pictured. You jab it into the vial and leave it there. Its barbed so it wont come out. You remove your needle of the plunger and screw the plunger onto the spike. draw your desired amount and unscrew the plunger. The mini spike has a nipple in it that springs closed when you remove the plunger. Before drawing, give the spike a wipe with alcohol.
PM for source as it isnt on eroids.
You do realize those are for one time use right? You put it in the vial and you are supposed to attach the other end to an iv type drip. Thats for multi dose at once not one ml at a time. You are asking for an absess or infection if you are leaving it in the vial for more then 24 hours.
I have seen the ones labeled for 24 hour use. I also have the same brand, different product number, not labeled for 24hour use. I totally understand the risk of contamination. I keep my things in a secure dust free location. I actually learned about this method from a vet here on eroids.
My bad
I knew the answer. Im just a cheap fucker lol. Not worth the risk at all. Thanks fellas.
Throw it in the bin . What gauge are you drawing with ? I draw and pin with a 25g , I buy a couple of hundred of them together and I'm a cheap mothef#cker lol
Its slow to draw but i never had any problem with pieces of the stopper falling into vial.
Thats where i fucked up. Drawing with an 18g to make it draw fast then switiching to my 25g and it shredded my top.
Thats what the idiots that i do trt with give me to draw with.
18ga ?? Damn, the stopper would look like a target shot up with a 45.
Maybe try a 23g to see how it goes or if your a patient person a 25g
good luck
When in doubt throw it out!
Bottles of test p are like $25
X2
I don't care how much I've paid for a vial if I have to question anything about it I don't use it.
He could also use filtered needles for drawing then switch it for injecting.
Cost is easily the same or more than tossing the bottle though.
Yeah trow it away.
I got 1ml small amps and when I cracked one open it crashed into pieces and dropped inside.
I used g23 needle to draw it out at the time.
I was sure and certain not to risk and to toss it. But wanted to know will the glass will go truu needle into syringe.
It fucking did. Realllll small particles.
Your case I would not happen probably, but risk of infection and contamination is real.
Toss it bro
Dude, you better throw out the fuck. And open another vial.
basskiller89Toss it
Scrap it bro not worth the risk of an infection.
x2