posted Wed, 10/29/2014 - 13:20
1657
pinning the day after I filled syringe
ad
OK, so I pulled up my test in my syringe.. was about to pin and I had company come over. So I put my filled syringe up and visited with my company. Forgot about it until today. Can I still pin it? Even tho I drawed the oil yesterday? I put it back in the original pack .. and wrapped it with a paper towel. Safe or toss it? Don't wanna waste it if @ all possible.
- Bookmark
- 0
- 0
Lots of ppl preload their syringes. Usually it's not a big deal, unless there is an unorthodox solvent or carrier like EO, guaicol or some other solvent that is used to break down and suspend those high dosed compounds like prop 200 , TNE, blends etc. The thought is that the plastic could be broken down by the solvents over extended periods of time and on a scale that you wouldnt notice which could be incredibly dangerous. Normal compounds without these harsh Chems, should be fine
Muscleg33kyour wisdom is greatly appreciated.
This is good info. I prefer to pin in the am, but I wake up at 415am and have lil kids, so the less noise and stuff I gotta do before I leave the better. If I put a blend in a vial at say 9pm, and it contains EO is that a big deal? I have been doing it this way for a while and never noticed any negative effects, but if there is a chance of any possible negative reactions I'd like to be aware
Not just from what one of our sources have said but from experience I can say that EO or Guacoil will dissolve the rubber in the pin after time (I used to preload for vacations). I can't give you an absolute time frame when it starts to happen, but I can say you'll never look at that shit again and fall back in love with lower mg BA/BB steroids. It's scary enough not knowing what you're injecting sometimes but that was a real eye opener for me. Stay healthy everyone
After some of the feedback here I decided to start pinning immediately after filling syringe...no sense in playing w fire
you are better off not waiting
Yea that's what I'm seeing. I have always loaded the night before, but it's an easy fix and thankfully I've never seen any adverse effects over the years!
Thanks nitti! It's pharma amps so, I should be g2g.
great question, now I know the answer...
I used to draw gear in my syringe and put it in a portable toothbrush holder when sleeping at my girls house so I could pin the next morning. Changed out pins the morning of and injected. Never had any issues.
I've done that before!
And changing the pin is absolutely essential... good point to make.
I would say change the pin to be sure and pin it. I have prefilled syringes before for no more then like 24 hours and have never had a problem. Over the years though, I have learned that if you leave the oil in the barrel to long certain solvents can disrupt the rubber stopper thus contaminating your gear, But if it was just yesterday I would change the pin tip and pin it. That is just me.
Left some prop in a syringe once for 5 days purely out of curiosity to see what would happen. When I went to look at it the stopper had turned all gummy almost like a thick tar.
Lol.. That's why are I wouldnt do it more then a day.
Ha ha...I've let em sit for a day before. Its just when people tell me they preload everything so its "g2g" scares the shit out of me
Thanks brother.. wasn't sure about it. Time to pin.
Sometimes I do the same shit!
Your good bro!