posted Fri, 08/17/2012 - 12:16
1470
mixing test tren same pin
ad
I was just wondering if it is an ok thing to fill a syringe with both test and tren with using the same needle to extract with. I was just thinking maybe excess residue from the previous compound will get into the next compound with the same needle regardless if the plunger is tight. Do any of u guys do this or know if it is ok.
- Bookmark
- 0
- 0
cdaddy7Yes It's ok but for more pinning comfort just make sure to change to a new needle bc pushing thru two rubber tops really dulls the needle and OUCH! I always use a fresh needle to pin myself and It's smoother and less trauma
telloladei noticed when i do vials its harder to push into the skin with same needle. Amps slides right in
I'm pretty sure below I informed you to use a fresh pin for the injection. And Z is right on use large gauge to draw less bubbles that way
zewiuse a different needle to draw.. bigger and 18g will work
Your fine you can do both. It's just a matter of leaving just a little bit of air in the syinge and then pulling out the second compound. Also if you hold firmly on the end of the plunger it will minimize any mixing. And to top it all off If you are running all of th vials. Who cares if a tiny tiny bit mixes with the other. Not sure if this is what ur talking about?
telloladeYea that's what I mean thanks ma man
I do this all most all the time but after I draw I use a new pin to inject. A sharp fresh pin will help with pip. Just make sure you get your air bubbles out!
telloladeI noticed I only get pip if I try ug not human grade. I had major pip n test flu already from multiple different ug tests. So I gotta stick to human forever