posted Thu, 09/08/2011 - 13:24
25243
+ 1 Raw powders (save money for other bodybuilding stuff)
ad
All these ug labs good and bad.....Arent they all just getting raws from some china source?
If this is the case, shouldnt we all just make our own and save money? Obviously its gotta be good powder and sterile conditions should be very strict. This would save us money so we can buy gh and other bodybuilding stuff lol.
What are your thoughts about all these ug sources and just making your own?
- Bookmark
- 1
- 0
EROIDS DOES NOT CONDONE THE ACT AND/OR BEHAVIOR OF MEMBERS ATTEMPTING TO BUY/BREW THEIR OWN COMPOUNDS. WITHOUT PROPER KNOWLEDGE AND SAFETY PRECAUTIONS THIS COULD BE DANGEROUS AND FATAL. WE WOULD APPRECIATE ANY DISCUSSIONS OF THE LIKE TO BE TAKEN TO PM AND NOT DISCUSSED IN THE OPEN FORUM.
Oh yeah for the third time check Northern Gear.
AnonThe only thing is, I would say 90% of the people on here don't have the knowledge to actually make it on their own. As for everyone below that says they're ordering shit from China, I will also say- 99% of that shit is not pure. So unless you have access to extremely expensive lab equipment to run tests on these..you have no way of knowing, or measuring anything for this matter.
Bro these people they don't know one thing about safety thats how they get bagged
Anontruly.. the easiest way to cut off a chain of production is start picking off the sources. Get bagged with a few hundred grams of ra powder and i'd say you're fucked. probably something you wanna keep quiet rather than getting on top the building with a loud speaker and telling everyone where you got your shit. surprised this guy didn't add in his social security nd phone number.
orpheas"[email protected]" hit that guy up i can vouch
AnonI almost feel as if you're promoting? the last 2 threads I have clicked on.. you have posted this same exact thing.....
I am really interested in this. I have been looking around for sources.
Is this kigtrophin good to go?
It is a lot cheaper than all of the other sources I found on trading websites.
I can't pm at the moment so I have to post here.
Anyone had any luck shipping to aus with powders? Keen for any knowledge on this
I think it would be alot better if you could make your own . If you had the know how to do it . Hell yea !
I had been homebrewing for a while until both of my powder sources went away. One I don't know what happened, and the other was busted by the DEA.
I had great results with the powders, and the cost of powders, especially Testosterone is 2-3 times cheaper if not more so than buying individual vials.
If I knew of a reputable place with good reviews that carried powders, I would be buying them now, as well. It's only because I don't have a source anymore that I've resorted to buying from labs.
Homebrewing IMHO was easy, cheap and very effective.
I want to try to make my own gear. I need some help, anyone that can lead me to more info would be appreciated.
AnonI bought Tren A powder and arrived within 5 business days from China.
Only did a small order 20g of Tren (20 Vials / 100mg ).
But the equipment i ordered to brew is alot more expencive because of the effin shipping fee...
For sterility thats where the FILTER and the BENZYL ALCOHOL come in..
For fast brewing bottletop filters
For small amount Whatmans Syringe filters.
Both sterile of course
Bottle top filters? Pm id like those
The tren I made from the pellets was pretty intense, I was gaining like crazy on it.
Idk where ug labs get their powder for tren, but the fina pellets are amazing.
I want some of that tren. I love tren.
I got some test p powder from that kig site about a month ago, I made some and its g2g as far as Im concerned. 100g minimum order, but at under a dollar a gram I feel it was well worth it, ill have test for a lifetime and so will my buddies.
AnonI did the same and am waiting on my powder now. Supposedly it shipped 2 days ago. How long did it take to arrive for you? Also, i'd be interested to know the carrier oil and the ratio of BB and BA that you used on your batches and how the PIP was. PM me if you get the time.
awesome, good to know....
I wanna know about other powders then, Deca and dbol. id make injectable dbol
the materials needed to make your own gear the right way with no short cuts isnt cheap as buying a couple of viasl here and there, especially if you plan on running more than one compound. say if you wanted to just get 100g of test e, thats atleast $150, then to do the "cleaner more sterile way" you would buy a vial crimper, thats about $210, then your choice of vials 10ml, 20ml, etc which ranges but around 1.50 per vial. then you would need the carrier oil which is about $16 for 200ml(u can get lower quantities), then you would need the benzyl alcohol and benzyl benzoate which you can get 50mls of each for about $6-12. then you would need the butyl stoppers and flip off tops, those are only a few bucks for a bag of 25. and you would need syringes and a whatman filter to filter the carrier oil with the powder etc.. plus the knowledge to mix it all up and the proper ratios for bb and ba concentration. this all adds up quick but the most expensive things are the powder itself and the vial crimper. you can get by without the vial crimper by using already sealed vials with stoppers. but still thats only one compound, and by buying the small things in bulk you could def make your on gear if you bought more of the different powders you want to use. its not hard to do, it comes down to if you trust yourself to keep things sterile, and if you trust your supplier with the powders.
word....
I have 200grams of test P just laying around, made 10 grams awhile ago. Just havent gotten around to making more (lazy) Ive made my own liquid orals and Made my own tren from fina pellets (best tren ever) and had 30mls for 95 bucks.
Its a process for sure, im trying to ask my csu lab professor friend, to let me use the lab but doubt that will happen.
I wonder how good the raws are (quality) on that KIGTROPHIN site which has a few reviews.
Wait, im talking personal use not distribute lol....
Y buy UG and spend hundreds when u can make ur own if u find quality powders.
Ugs are all just china powder I bet
So how small a quanity are you buying??
Producer packs it in 1 kg bags.
Trading Company breaks it down to 12-14 @ 100 gm bags (with added filler), (that 100 vials of Test Prop 100)
Importer breaks it into 3 @ 50 gm baggies (with added filler), (thats 50 vials of Test P 100)
Middle man breaks it into 3 @ 20 gm baggies(more filler), (thats 20 vials of Test P 100)
Jimmy @ the gym breaks it into 3 @ 10 gm baggies (but adds quality filler to protect his rep), that is (10 vials of Test P 100)
So, you are getting a bargain.
The UGL buys straight from the producer and gets 1200 vials from 1kg of powder.
The more people that stick their fingers in my gear, the less I like it.
AnonYup.. and these people neglect to actually test to see how pure the powder is.. just because they buy 25 grams of tren, they actually believe they have 25 grams of tren so nieve. Love your posts KMC!
dude.... UGL buys straight from the producer? Um is that a joke?
Because in all actuality, they get it just like everyone else. Every producer sells in 100gram and 1kg bags.If you anyone in china, there are several "producers" that doesnt mean its good or bad. Come on now man, you're sounding like a ug source over,trying to get people to not buy their own powders and keep wasting money on finished products that are overly prices for basic materials.
Just saying bud....
You sir know more about buying it than I,.............carry on,...........LMAO
sgtstedankoI know me, and consider myself relatively intelligent. There was a question on here not too long ago about powders So I started looking into it. You'd have to make a lot of gear. You'd end up having to sell, or have stockpile of each for a couple of years. But I still haven't looked into it too much, but am still considering it. But still, I just don't want to be the first guy to pin the stuff I make. Might have to give it to my Akita 1st:)
Your question has been posted several time ,........once more into the flames.
While buying from China is a possible, it becomes a matter of scale and other peoples fingers.
1kg of Test prop powder will make 1000 vials @ 10ml of TestP 100.
1kg of Test cyp powder will make 400 vials of TestC 250
Shelf life, 2 maybe 3 years tops.
Less than 1kg of powder would probably mean someone else fingers in your gear, how many 100g packets of powder are in 1kg ??? I bet it's more than 10 in reality.
After all I hear there are 20 - 1 oz bags of pot in a pound.
So either buy 1kg and start retailing or buy a smaller quanity of a possible unknown powder at your own risk.
This is a trap! He's under cover! haha...Just playin. BTW there should be 16 oz of pot from a lb unless there skimmin the bags which I'm sure wouldn't surprise anyone
Sir, I just checked, your right 16oz to the pound, I'm going to call the BBB in the morning and report them.
Thank for the heads up.