posted Thu, 11/15/2018 - 21:59
4939
Hair and fluffs in 7lab oils
ad
Today i wanted to start pinning some test e and deca, which I've got from 7steroids from his promo. Like each time when i start a new vial, i removed the labels to check the cleanness of the oils. Was a bad surprise, both vials had fluffs and futhermore one vial had a short hair inside. I recommend all guys, who were part off the same promo or bought some gear, to check their vials. Batches were the following:
Testolab-E 250
LOT: E7111AA
EXP: 04.2022
ISN: S1RJ-OMWS-L68C
Decalab-250
LOT: N7118AF
EXP: 02.2022
ISN: S1ZI-I8JC-OAE0
Ordered from:
- Bookmark
- 0
- 0
Or I could have used a mini spike, but why should I? If gear comes dirty like this, I throw it in the trash. Not worth using it.
Btw. If you don't know mini spikes, check my topic out:
https://www.eroids.com/forum/steroids-qa/accessories/mini-spike-dispensi...
Well if you use it anyway according to your post why not...also just cause you don't see floaties in gear dosent mean its clean either
Could I get contaminated unsterile gear even if it looks clear? Yes, for sure.
But why should I use gear which has some shit floating around? Gear isn't this expensive that I'd risk my health pinning it. Even if I would filter it...
You could have used a whatman filter and seen exactly what you filtered out and still saved the gear...but its weird that the guy just disappeared instead of checking his batch and sending out new batch and filtering this batch and putting it in sterile vials or selling it in 100ml jugs filtered and advising customers to refilter into their own sterile vials ....big waste of money time rep...he probably just promo'ed another board/ forum and sold it dirty
We are very very sorry for that! Of course this is UNACCEPTABLE!!! This a big punch on our reputation, plus this was during promo, i hope you guys don't think we've done that to harm from the start our reputation.
I am agree with what somebody told "Any airflow could have kicked up loose hairs or dust/fibers in the air and they settled into the vials." AND "For the most part the BA kills bacteria"
Of course i don't ask to use this vial, but am more than sure it is not contaminated, BUT i ask if it is possible to send this vial to a lab test, just to make it clear it is contaminated or not, have any bacteria or not... we'll compensate expenses.
Guys, THIS DOESN'T MEANS THAT WHOLE BATCH is compromised and i KINDLY ASK others that have clear vials with no dust or other things to post pics.
Unfortunately tattoofreak had a bad luck and got such vial... Guys, unfortunately, this can happen with 0.1% vials from the whole batch, even in a super sterile lab room.
Once again i kindly ask tattoofreak to send this vial for a lab test and post the results
Also ask others to post pics of their vials, to show that other vials are clear with no dirt or other things
From our side, in the near future we'll send all products to a lab test and will post results on the website
Like i told 7steroids per pm and in this thread before, I trashed the vials. Otherwise I would send the vials for lab test. Have to say it's a pretty good customer service here. Even though this was a free promo, he offered a reship of this vials. Furthermore I can choose any brand i want for it.
Ty freak! I just checked mine and same thing bro. I’ve gotten to complacent haven’t been checking vials. Thank you for the kick in the ass.
Mine was also from a promo.
Chucked.
what do u mean same thing...??? can u show us your vials?
Sure.
Looks like particles of something. Not stopper not crystals.
I’m not here to bash you. You gave me free shit.
Unfortunately I used half the vial before seeing this.
But I didn’t throw it out it’s at the bottom of a bleach bottle (sharps container).
But I will gladly cut open if u like.
Edit.
Retrieved vial posted pic
https://www.eroids.com/pics/for-7steroids
I just did this with my 7 labs test cyp and it's clear as water - no floaties . Haven't cracked into it yet . His dbol is good . I'm torn now on this cyp
Has source said anything regarding this ?
Respect
Dope
Almost forgotten to send him a message. Thx for reminding me, mate.
Hopefully the OP is planning on putting this up in the Src thread. Looks like two members so far on this thread have issues.
Great idea carlos ! This is what i love about our comunity
Good looking out brother
Respect
Dope
Good idea, brother. I put it on his si page, with link.
I've pinned my test twice.. I checked it when I first got it looked clean.. but pulling the label off and looking closer I found one small floater.. trashed it right away. Same batch#.
I just checked both mine.. same batch and expiration and both vials extremely clean and clear.. crazy..I think I still might trash em idk
Ok. That's strange. Don't understand how the vials from same batch can different?
It's a ugl. . batch numbers don't really mean shit. . mass produced labels and different brews ya know.. I'd put my money on that probably being the case.. just weird that both vials of2 different things were both dirty
No truer words spoken! UGL ain’t pharma
"mass produced labels and different brews"
Sounds plausible
exactly how it’s done bro
What would u do bro.. my vials look clear as hell but the seed of doubt been planted man lol.. should I chuck em.. I'm kinda leaning that way right now like I said.. gears cheap and infections are some scary shit
I’d toss that stuff and never think about it again.
Better safe than sorry, mate.
The short answer for everyone is yes. Also the safest answer. But....
Well here’s how I look at it and take it how you want. That vial literally cost between 3-5$ To make. Hundreds at a time are made. They all sell between 40-70$ a vial. There’s serious profit to be made. Damage to ones reputation in this business is significant and not taken lightly. In order to rebrand and reinvent is a pain in the ass. That also would cost money. So I find it hard to believe this was done without any regard to the cleanliness of the batch. What probably happened was the environment was not cleaned and prepped properly, the sterile environment was breached somehow and PPE was not used properly. Any airflow could have kicked up loose hairs or dust/fibers in the air and they settled into the vials. I would hope that the vials were all either autoclaved or high heat sterilized or pre ordered sterilized. That would mean most of these are hopefully safe. Homie just got the raw deal but I am turned off by the lack of QC. There should have been sample inspections in the lab plus the shipper for this company it’s paramount that they do some QC before packing. I don’t know the scale of this outfit but smaller UGLs rely on their shippers to do this shit before putting any labels on. Well at least any upstanding legit UGL would expect this out of their shippers.
Now if there were widespread reports of infections that would make me more worried than a hair and a fuzzy. Widespread infections would mean there were legitimate contamination of the entire batch. For the most part the BA kills bacteria so as long as there’s not widespread reports personally I would run a whatman and call it good. But that’s just me. But like I said earlier the safe thing is to just junk it.
But I’ve run quite a bit of homebrew over the years and it wasn’t made in some lab but rather in a kitchen just like yours or mine. Too be honest the best finaplex I ever ran was made in my homies house. My point being is it doesn’t matter if it’s made in a lab or my house. There needs to be some kind of QC efforts.
Well said bro and pretty much what I was thinking.. like I said both vials are crystal clear and i haven't heard anything about infections at all. . This brand has been around for a little while and I'm hoping it's g2g. ... I've used a site in the past that's not on here and 7labs had been in there for atleast a year maybe more..I'm just gonna sit on them for a little while I think and see if I hear anything more
It sucks man.. makes me still not trust mine.. but an infection from dirty gear scares the shit outta me bro but again thanks for the heads up
Good looking out dude....literally! I've got three test prop vials at home to go check now
Did you try heating it up. Sometimes if stuff is slightly crashed it may resemble some of that stuff. If heated and still there, then definitely trash.
This aren't crystals, bro. This are definitely lint/fluff and i don't think that the short hair will dissolve by heating
Mmmmmmmm. Looks and sounds delicious.
Great reminder to everyone.
God damn !! Throw it in trash ..
I ALWAYS inspect vials even from sources i use since years
Good job brother informing our comunity
Respect
Dope
I've already did, bro.
Thanks for the heads up bro.. ill be checking mine as well
That’s the black market for ya, always check your gear we’re not picking up a script from the pharmacy here guys.
Good eye man, I don’t have this gear but if I did, clean look or not I’m trashing it not worth the hospital bill
Totally agree
Thank you for this important review. I was about to order from them.....its reviews and members like this, that make Eroids such a valuable site for gear users. Thanks again TF!
And here I thought finding a hair in my food was gross. F@#k that! If you can see that much crap floating around, just imagine what you can't see.
Just checked mine and it's clear as could be. Same lot number and expiration but different ISN.
ISN:S173-8JSF-GZOZ
Testolab-E 250
Thanks for the heads up though
BTW you have the test and Deca info vice versa
RivaEvery vial has a different ISN genious, the ISN is to check if the product is real.If you had the same ISN one of you would have a fake product. Same lotnumber means you have the same batch.
No need to get smart with me. I'm simply pointing out my vials are clear
RivaThen why the pointless info about your ISN like it makes a difference for the content of your vial. And then thanking him for "the heads up though" like your vial is good to go, newsflash it's not. This is a major safety hazard for anyone with the same lotnumber regardless of the isn or how your oil looks. So maybe I do need to get "smart" with you.
Why are you even commenting here?...do you have something to contribute to this post? If not keep your mouth shut little man
RivaI'm commenting to inform your dumb ass meathead, because you simply can't get it through your thick skull how bad this is. Plus you contributed absolutely nothing except your pointless ISN number lmfao.
The op posted his ISN number along with the other info. That's why I posted the ISN "genius"!
RivaWhatever I'm done going back and forth. Do what you want.
Yeah maybe next time spell "genius" right when you're trying to insult someone's intelligence.
Lmaooo
Lmao....