+ 5 Clarus Test C 300
So here’s what happened with my Clarus Test C 300:
I originally posted bloodwork that showed lower testosterone levels than expected while using it. I was taking 150 mg/week but my numbers were way off. I contacted cust support, and without any hassle, they sent me a new bottle and offered to pay for testing on the old one. I agreed.
The test results from the old bottle came back — around 250 mg/ml Test C and 27 mg/ml of Masteron Prop. That confused me, because there shouldn’t be any mast in it.
To get a clean answer, I sent the new bottle in for testing — this time I didn’t transfer anything or mix it. I just sent it as-is.
The results came back almost exactly at 300 mg/ml, just slightly under, which is totally acceptable.
As for the earlier test showing mast? That’s on me. I realized I probably used the same needle I had used with Mast Prop when I was transferring the old Test C into a new vial I got from Amazon. So that likely contaminated it.
Bottom line:
Clarus Test C 300 is legit.
My low bloodwork was likely due to user error or something on my end, not the product.
Their customer service is honestly some of the best I’ve dealt with. They didn’t hesitate to help, and they were totally professional.
Also, I have a vial of Titan HGH currently being tested — I’ll post those results as soon as I get them.
- Bookmark
- 5
- 0
Let me make sure I’m understanding this correctly. the test that had you at 297 on 150mg a week did have 250mg of test c In it? This was the stuff you sent in for testing and had some mast in it? But it was supposed to be 300. And you were taking 1/2ml a week of it, which is 125mg a week? And real pharm grade test at 150 a week puts you over 1100, which is pretty close to where 150mg a week puts me on real pharm grade test. 125mg is not underdosed enough to have you under 300. You should still been over 800 easy.
What do you suspect was user error? This isn’t rocket science and it’s pretty hard to fuck up. You just inject the test and then get blood work within a reasonable period of time. I take 75mg twice a week, and even 5 days after a 75mg shot I’m still over 700. Are you splitting your dose twice a week or one shot a week and how long after did you pull bloods? The only way I can see your test levels being under 300 on 125mg a week is if you waited like 2 weeks after the shot to pull bloods.
I was taking 0.25 ml twice a week put me at 297 which threw me off. I had that shit tested and it camd back around 250 with 27mg mast in it. So I'm thinking I fucked up the sample somehow. They then sent me a new bottle so I had that bottle tested and these are those results. And I know it's not rocket science I injected the stuff just like I always have. Idk why I was so low. And it was only 2 days after a shot I got my bloods. Def not two weeks. I will say the stuff I was injecting was starting to turn cloudy before I sent it off for testing if that says anything. I'm getting bloodwork done again soon to see where I'm at now. I'm honestly not sure what happened here. All I know is the new bottle they sent me is testing fine. Although I sent the entire bottle in for testing just to clear this up but oh well. Getting my bloodwork done soon and moving on from this.
2 days after is when it would be peaking. So the results from Jano said it was 250mg/ml, you were taking .25 twice a week which means you were on 120mg a week. On 150mg a week of pharm grade test you’re over 1100. On 120mg of this stuff you were 297 2 days post injection. That makes no sense. You should have been more like 800. Idk man, I kind of question the integrity of the report from Jano. And the mast being in it wasn’t user error. You would have to have .25ml of mast in the syringe you were using to transfer the test for there to have been 25mg/ml in the sample. Assuming you sent him just 1ml? That’s hard to miss.
Yes I only sent 1ml. I'm not so sure the amount I sent matters tho more than the potency of the product. But yeah the needle was completely empty. Also had I used the needke I used to draw up my shit I was drawing test p not c, mast p and Tren a. So how only mast p and 27mg/ml got in there is beyond me. I couldn't get a detailed answer from jano. Here's my exact convo with Jano copy and paste.
Me: So I had a question on the last test you did for me for the test c. It showed 27mg of mast p in it. Could you give me an idea how they may of got there? Like say if I used a needle I was drawing up tren a, mast p and test p with and used that to transfer the test. Would that contaminate it? Like was there residue in the old needle I used. If so wouldn't there be tren and test p to? I'm just confused what caused it and I'm trying to make sense of it. Like would residue show that much of it if there and why only mast p showed up?
Jano: Hello,
yes, that might be the case and reason of the cross contamination.
Hope this helps.
With best regards,
Janoshik
That's all he said. Shit don't make sense. Why I was that low is beyond me. And I just got off a blast 400/200/200 test/tren/mast which had my test level at 4500. So I know I respond really well. I was using kits4less test p, yourmuscleshops tren a, and gdroids mast p. I'm not trying to knock on kits4less. I mean they made it more than right with me and was more than willing to reship product and have it tested. They also said they was discontinuing Clarus. I may send out some of their Genero products test with my own money. I'm also going to use only their test c only and get bloods again in about a month. I will update.
Edit: also I had their tirzepatide 10mg tested along with the test c. It came back at 11mg. And their hgh was on point. So I don't think that the stuffs all bunk. Just confused on this matter. Either way like I said before the new bottle was spot on. I don't personally think they knew the new bottle they sent me was spot on just so I'd get it tested. I'm the one that offered to have it tested. They did not ask me.
Well using the same needle does make sense for how mast ended up in there and not tren. Assuming you drew the mast first, then tren, oils don’t always mix in the barrels. So when you injected the tren would have all went first, then the mast, so whatever was left in the needle was likely pure mast as the mast would have flushed out all the tren, except for maybe trace amounts. But if this was the case it would still not be .25ml to make up 27mg. The needle holds very little. I’d guess under .05ml. So that would be like 5mg of mast.
What were your test levels at 150mg?
I'll give you a whole breakdown.
Before starting Test
Total: 152
Legit Test C from my doctor at 250 mg/ml
Total: 1164
First Blast test/tren/mast 400/200/200
Total:4500
Free:1400
After blast I went on Cruise using the Clarus C 300 at 150 mg a week
Total: 295
Free: 67
Seemed really low to me considering my initial results when I started test. I figured I'd be around 7 to 800. Not sure what I did wrong. I have all the bloodwork for what I've stated.
Refardless their stuff tested legit. That's all that matter. I started pinning my delts with a 5/8 inch during that cruise. I've since went to 1 inch. Wonder if I wasnt going deep enough. Before then I only pinned my rear glutes with 1.5 inch. I now rotate.
Interesting !
Thanks for sharing that, brother !
Hun, is the popcorn done yet?!!
So just to 'clarify' lol - this was a Vial that was sent to you after you had the last vial tested and had complained? MMmmmm
Are you saying that the first vial you bought as a random customer contained Test Cyp and Mast Prop???!!
anvilHAND picked vial sent him, after all was on the table already......thought the same exact thing
lol I’m picking up what you’re putting down there
Yeah man I posted it right here in the discussion. Just scroll a bit. Had 27 mg mast p. Only thing I can think of is I used the needle that I used to draw up the mast p in...to transfer the test. Other than that I dont fucking know man lol. All I know is the new bottle they sent me is legit.
This makes zero sense since mast prop is dosed at 100mg/ml this means you had 0,25ml mast prop left in the needle/syringe?? How do you miss that?
The next question is why are you transfering gear between vials with a used needle...
Can you clarify if this is the vial you initially drew out of or a separate vial you had in the same order?
This is a seperate vial. I sent a fresh vial in that was untouched by me so there would be no chance of me cross contaminating the sample.
Pretty sure he cleared up this point mid way through the paragraph... "Also I want to say that was user error on the mast p showing up. I transferred 1ml into a new vial I ordered on Amazon. I may of used the needle I was transferring mast to mix for a cycle I was on."
Keep negging me pal - see how far you get.
Lmfao......
I'm referring to him btw.....lol
Lol someone's feelin uppity.
Sorry, didn't realize they were only for people who dont live on the forum detective....
That's correct - my beds over there in the corner next to my sexy bitch.
BTW I prefer Astragalus to Asparagus, it does more.
anvilOMG LMAO
L.O.L
Ohh Sorry, I am not use to seeing things like that so it probably didn't register properly. So you believe the needle he used had 27mg of Masteron clung onto it or inside it? Coupled with the Test Cyp also ironically being 50mg lower than the stated dose? Strangest thing I've ever read.
I smell bullshit lmao
itszoot89i just lol'd with a side of "pffft"
Literally makes no sense
I agree. And that's why I did this
Trust me I've scratched me head through this whole process. That's why I didn't touch the new vial just sent it in as is. I know I smoke weed and I can get a little foggy sometimes but idk how I pulled that one off...and I'm no scientist lmao.
yea test cyp should of been 300 plus the added mast.
anvilyeah but even K4L own tests it never hit 300 except this new vial they sent him with 294mg which still costs more than an vial of Test on the interweb.