No pip gear warming
So this has been my favorite thing posted here but I would like to post my own to try and contribute. So for people getting PIP (post injection pain) many vets have gave us the great advice of warming gear. So this is what I have learned and do from learning here i boil up some water well not to a boil but more around the 150 range that's about the tap on its highest but boiling first obviously kills everything so let boiled water cool just a bit. Pour water into a shot glass the normal shot glass size you buy from any store then drop vile in shot glass (shot glass) will keep it from topping over if vile Is low give it about 2 minutes to warm your gear pull it out wipe with alcohol wipe and draw, it will draw very well while warm. Once drawn switch pins get out any bubbles and boom you will have no pip at all. The only thing I have to contribute here that has not already been said is the shot glasses everything else I learned from reading here. Well hope this helps for people scared of pinning I was and now I can ed if needed
- Bookmark
- 0
- 0
Testrogen_PropC...Sounds like a good idea with the shotglass. Would be perfect to make sure no water can sneak into the vial around the stopper.
One thing I've noticed is that for me whether my gear is cool or warm/hot, I still only get PIP from short acting esters. Especially Test prop. But hey, after the streak of tren cough I've had in the last month, I'll take PIP any day with no compaints. Lol
nice post dude.... I'd also recommend using a hair dryer
The base of an old coffee pot works well too. quick and easy
I used to heat my gear before pinning. Now im so tired of pinning and wanna get it over so fast i just deal with the pip. Idk if this actually helped or not. Maybe tomorrow ill try warming my vials and see if it helps at all cause i been getting bad pip from the gear im using. I think dry heat is definitely the way to go though. i dont trust water around my vials.
I warm my gear in the pin, only so that it's easier to push thick gear through the 25g pin I inject with. I keep my gear at room temperature. I have found either gear has pip or it doesn't. Warming it up really made no difference.
I don't like to use water around my vials because water seems to find its way into everything. It can be a way of heating it if you are VERY careful. Definitely don['t be submerging your vial or let water hit the top of it. If your gear suddenly turns cloudy on you one day water likely found its way in their somehow and you better toss it.
GnarkillThat's what I thought that's why I put them in small shot glasses so no water can get in at all I took a pic but still don't know howntonpost to forum
I always warm my vials on a heat pad on high for about 10m. Makes pinning it very easy, Ive found it reduced pip for me too however I attribute most of it to being able to keep the pin steady since I'm not pushing as hard down onto the pin and causing the pin to move inside my muscle. I find placing a hot pad on the injection site the next day reduces second day PIP considerably however
GnarkillI have a heat pad I will definitely be trying this good input this is the answers I like to see
unreal89I always warm my gear to flow faster throigh 25 ga pin sometimes i get pip still but yesterday let it get hotter and first time ive had zero pip so yah almost boiling will do it
Put the vial in your pocket or hold it, just get it to your body temperature is good enough. Roughly 15 minutes will do. Never had a problem that way.
GnarkillLmfao this reminds me when I would put my skittles package under my leg to soften it up
GnarkillI stick by my post
Run pin under hot tap water for a minute or add sterile gso.
Agreed with running pin under hot tap water for a min
Does the trick for me
GnarkillYes bro a good way to warm for no pip thanks for not patronizing me about but I am always super worried about anything that could happen better safe then sorry so I go hospital style and we'll my wife makes me do it
So your saying if my body doesn't like EO then I should just "warm my gear" then I won't get "pip" from it??
Bro how much "research" did you do here?? Because usually to reduce pip people add something like EQ 1 to 1 ratio or less in some cases to reduce pip. Or sterile GSO, sterile CSO..IMO the only time one should heat gear is when the gear has crashed or the carrier oil is super thick to thin it out temporally so it's easier to draw and inject.
GnarkillIf you haven't tried it then you can't deny it lol this is for more of Virgin muscles for people that haven't pinned to much but I stuck to the same thing everytime
Now you officially have blown my mind lol... So that's the answer to no pip on virgin muscles?? Really?
GnarkillWell all I can say is try it you can mad dog me all day but it will change your pinning 10 fold
Seems like a lot of work for 1 pin.
GnarkillIt does but if your serious about pip job wise and cleanliness then it's the way to go I didn't even go into the alcohol wipe rant on it i use 6 wipes just for a single pin let alone the washing of hands and body part but I'm just super anal about being clean I guess
Whoa. IMO, heating gear is more to allow it flow through smaller pins, or to uncrash. I dont think it has this much effect on PIP....however, I dont heat mine so I wont speak from experience.
GnarkillJust try it out even if you just run it under hot tap water. for me it's night and day but not everyone is the same I was just throwing this out there people can talk all the smack they want but until they try it but I did learn that from reading here if I had 2k karma people would believe me how about all you people hit the search button you can learn alot
Fair enough. I will contiue to draw, and pin with my unheated 23g. Hopefully this helps some folks.
GnarkillBro at least run it under hottest tap for a minute you will see