First time injecting
hey,
im going to be injecting 1ml test e twice weekly (300mg/ml) I've got some questions and id really appreciate any answers.
I've read some air needs to be injected into the vial before drawing the oil into the syringe, if im drawing 1 ml per injection will a 1 mil syringe be big enough or will i need a 2ml syringe.
will a 22 gauge 1.5 inch needle be ok for drawing and injecting, or would a 23 gauge 1.25 inch be better, I've read many conflicting views on the best needle size
my vial of test e is 10ml, if i am drawing 1 ml, twice a week what is the best way to store the vial, is there any danger in having a vial with a needle puncture in the cap, as far as bacteria getting into the vial.
when i draw 1 ml twice weekly, is it ok to use the same puncture hole in the 10ml vial from the previous injection.
sorry if these are very newbie questions, im just trying to be very thorough before injecting for the first time, thanks for any answers.
peace and love
achilles
- Bookmark
- 0
- 0
needs a 2 ml syringe.
When you push the needle into the rubber top it can demage the otherwise sharp
needle. The needle should be as sharp as possible so it doesnt cause any pain
when you penetrate your skin.Never tried to use the same needle though.It might
work fine to draw and inject as well.
with alcohol swabs before drawing.
spilling out of it.
Check out this link. It might help. And good luck with your cycle.
http://www.spotinjections.com/index3.htm
for me i accidently purchased some 18g and when i openned that bad boy up i knew right away i was not pinning with that so i use them to draw and then change to 22g for pining. i watched some videos on youtube that show clearly how to do your pinning and they have different ones i just pulled this for you as an example. i like the delts but found no pain in the gluts either and minimal in the quad after botchin the first one and leaving myself with PIP for a few days.
http://www.youtube.com/watch?v=Spoz3T5D_SU
One tip I would give for you first injections is just make sure you keep the needle still while pushing your gear. My first couple times I was nervous and moved a bunch. Hurts like a bitch the next day!! I always inject with a 25g. Very thin and never had any issues. Just warm up your oil by running the vial under warm water prior to drawing.
y2ice101This is how I learned my 1st time in my delt is where I would start or gluts..go here spotinjections.com it will show you with pics and instructions,i use 25g to withdraw test e and then pin with same.unless you are in a hurry go with 23.
Anonouch.. y2.. I use a needle to draw and one to inject with, drawing dulls the needle and since I m such a grrrl I go for as painless as possible..;-)
Some good info has already been given. As far as syringe size goes I myself always draw in past what im gonna inject & then push the excess air/oil back into the vial ( I use a 3ml syringe regularly & inject 2.25ml on current cycle) . Even if u would be stacking 2 diff compounds in the same syringe you can still do this as it takes the two compounds a moment to mix (they are still separated in other words).
I use a 18g to draw with and a 23g to inject. Be sure you always wipe down your vial tops with a alcohol pad each time. Storing them setting upright has always worked fine for me. I will use my 18g drawing needle a couple of times (always wiping it down w/ a alcohol pad after use). But I never reuse the 23g injection needle.
DefconYou dont have to inject air into the vial it just makes it easier. 23g 1.5 works fine for withdrawing, thats what i use and inject with.
thanks for the replys guys, your answers and the link from AT has cleared up a alot,
I'm going to be pinning glutes and I'm a fairly lean guy about 180 pound/12.5 stone
I'm just about to order pins now from http://www.sms-health.com/
the options seem to be 1.25 inch 23 gauge, 1 inch 23 gauge or 1.5 inch 22 guage
what do you guys think would be the best option for someone of my size injecting in glutes.
many thanks,
achilles10
AnonQuestions are good and AT2011 sent you great read.
Just watch some of the videos on YouTube on injecting testosterone. Were you you plan on pinning at?
Or you can read this http://www.eroids.com/forum/general/topic/complete-injection-instructions