+ 3 How To Reconstitute GHRP-2 Peptide (Step-by-step guide w/Pictures!)
How To Reconstitute GHRP-2 Peptide (Step-by-step guide w/Pictures!)
GHRP-2 is a peptide which is bought in powdered form. In order to inject this compound, it must be reconstituted through the use of either sterile water or bacteriostatic water. Both are acceptable re-constitutional ingredients, however the use of sterile water will see the GHRP-2 degrade at a faster rate than bacteriostatic water.
Preface:
Assuming your vial of GHRP-2 is vacuum sealed (as many are), when you reconstitutie the GHRP-2, withdraw your sterile water/bacteriostatic water then firmly hold the plunger of the syringe as you insert it through the stopper of the GHRP-2 vial. Don't let it suck the water from your pin. Turn the vial at a slight angle and slowly drip water down the side of the vial being sure not to shoot water directly at the powder. Your GHRP-2 should melt, if it fizzes up you've possibly just damaged the hormone. Do not shake the GHRP-2, instead lightly swirl it and store it in a fridge and use for upto 30-60 days
Ingredients:
1 x 5mg GHRP-2 Vial
Sterile Water or Bacteriostatic Water
1 x 1ml 29g 1/2" Needle (Insulin Needle)
Alcohol Swabs
Dosages:
Working out dosages for GHRP-2 is simple.
With 2ml of bacteriostatic water in the 5mg vial, here are what your doses will be;
+) 2ml of bacteriostatic water in 5mg of GHRP-2 = 100mcg/0.04ml (0.04ml = 2 ticks on an insulin pin).
Step 1:
Take the cap off the GHRP-2, so that it is ready to be swabbed by an alcohol pad.
Step 2:
Prepare Insulin Needle (1 x 1ml 29g 1/2" Needle).
Step 3:
Use an alcohol swab to wipe the top of the GHRP-2 vial.
Step 4:
Prepare Sterile Water/bacteriostatic.
Step 5:
Withdraw water from the bateriostatic water vial.
Step 6:
Inject bateriostatic water into the GHRP-2 vial, slowly and ensure the water does not come in direct contact with the powder, instead inject so that the water falls onto the side of the vial and hits the glass before it comes into contact with the powder - GHRP-2 alongside all peptides are very sensitive compounds.
Be very careful that there is no vacuum from the difference in pressure with the atmosphere and the pressure within the vial. To combat this, inject the amount (ml) into the vial before withdrawing that same amount (ml).
Step 7:
Now either store the GHRP-2 in the fridge ready for consumption or inject subcutaneously (a step-by-step guide will follow).
- Bookmark
- 3
- 0
tallandswoleshouldn't the step to add air be before you add the BW to the peptide?
This math is getting me confused. At a 5mg ghrp2 + 2ml BAC water would give 5000mcg divided by 2ml. 2500mcg per 1ml, at that ratio 1tick on a 100 pin .10ml would be 250mcg. Am I tarded ?
Still need help
Yeah man, I understand most of the conversions iu's , mcg, ml. All of that makes sense, but this math seems wrong to me, I must be missing a step.
Could probably combine all these reconstitution threads together since it's exactly the same for all of them unless you add a ml of BAC water here or there. Just my .02
Calculator is the shit BTW! Been meaning to say this
I know this is repetitive but I already using ghrp6 and cjc no dac dosage at 100mcg each ran out of slin pins
Still have 3ml 25g pins can I use those until I order more and if so what or how do I dose it on that pin
When you say 2 ticks on the slin pin, do you mean 2iu or 2 lines?
He means the individual lines. Lets take a 1ml slin pin for example. Depending on the manufacturer the pin will either have 50 or 100 lines. The one to OP is referring to is a 1ml slin pin with 50 total tick. Therefore each tick (line) is 0.02ml. 1ml/50 ticks = 0.02ml/tick. SO when dosing 0.04ml you would draw up to the second tick. BUT if you have slin pins like I do and have 100 ticks for 1ml you would draw to the 4th tick as each tick is 0.01ml.
Ah I see. I do have the slin pin with 100 ticks, that's what confused me a little. Thanks crazy for replying and clearing that up for me.
if sterile water is used, how long can it be stored? a week? 2 weeks?
i don't think i could find bac water from where i am.