posted Tue, 11/11/2025 - 03:51
1026
+ 1 Mix blends
ad
Curious what’s everyone take on mix blends. I normally buy separate vials to know how much I’m injecting. But seeing these mix blends makes me wanna try it out but I’m guessing you won’t actually know how much you’re injecting of each compound per a cc since it blended or can someone give me more info on that.
- Bookmark
- 1
- 0
Blends are great, high dosed gear is great, low dosed gear is great. I love ALL gear thats dosed correctly and is sterile. I dont discriminate. I'll use whatever.
Its not always easy to find one blend with the exact dosages that I wanna run so usually, if im running a blend, ill also be running something else also.
True that’s the only thing I’m iffy about but gonna give it a shot. Seen some decent blends out there that caught my attention
my opinion's from my experiences.
I typically blend in barrel with slow esters- higher volume cocktails with slow esters split between 3 injection days if needed.
fast esters typically lower MG/ML and EOD/Daily I find the blends work great, but never the cost effective way. I found a blend on here I like- 70mg test Phen, 70mg Tren Ace, 100mg mastP, 10mg ment . I also have used numerous of the "rip-Cut-hard" 300mg blends - in the idea of ease.
I’ve seen some blends like that around and was always tempted but wanted some other reviews before I made the jump
I prefer mixing my own.
Ranger3252I like short eater blends more so than the longer ones. They hit me the best with few on zero sides. Test P. Mast p and tren A, take. 50 mg per day. If I’m running long esters I prefer to just mix them in the same syringe like 200 mg of Mast E and 300 mg of test e every three days.
I’ve used the short ester rip blends and typically inject EOD no matter what ester is it. And same I’ve always just mixed esters but I’m just gonna run test/eq and figured if I run 1:1 ratio anyway let me just get a blend that has it and do it that way.
Ranger3252I had a test e eq 600 mg blend and that was one of the only times every injection site took about a week to be normal again. Never again with that mix. I even reached out to the vendor and said it was normal. I mean whatever. When I do 1-1 ratio with test eq I don’t get that pimp walk like I did on tha blend.
Damn was it 300each? Glad I never had that issue and
Don’t want to. Ran into that small issue with primo 200 and shut up 2cc and it was sore for about 4days and got bruised. The test/eq mix is 400 or 500 with 100 of tren too.
Primo 200 fucks me up.
Bro same but I mixed it with 1cc of test 300 and then didn’t have an issue after that.
Well when it comes to testosterone, the blended esters work better for me so I prefer them.
I’ve done testosterone blends before. But I was more curious about blends like test/npp, test/deca, test/eq, etc..
When it comes to other compounds I want to mix my own in the same syringe so I can take the dose I want of each compound.
I’ve always done that as well but a lot of these blends have decent size Mg per ML for the compounds in them.
I think they're alright. If you have ran the compound before individually. So you know their effects. Like panda said they could be one high or low. And i would never get more than 3 compound in a blend cuz then it's just too much and the risk of something not being in the blend at all is much higher.
True! I seen a test/eq blend that’s a 1:1 ratio and another one that has slightly higher eq so I wanted to give it a shot but wanted more insight or review if anyone has done it before giving it a shot.
Bro, for the first time in years of running gear, I decided to mix all my compounds together in one sterile vial. I only prep two vials at a time (about two weeks worth) because I may need to adjust dosages up or down depending on how things are moving, so I don’t want to commit an entire batch.
This run I’m testing daily pinning (regardless of ester), so this is the most efficient way to do it.
Concentration of each compound:
• Test E: 400 mg/ml
• NPP: 150 mg/ml
• DHB: 100 mg/ml
• Mast E: 200 mg/ml
My total weekly dose is around 1.6g, plus I’m testing Tbol at 60mg/day (not loving it so far, just being honest).
The math is simple, bro:
Take your weekly mg total → divide by 7 → convert that into ml → pin that amount daily.
Done. No overthinking. No drama.
Daily pin, stable blood levels, zero guessing.
If you’re not into daily pin just adjust it to your pin schedule…
Be consistent and enjoy the ride. lol
Why aren't you loving the tbol? As I'm staring at a box of tbol
Before I start … you have to give it a try, Bro…I started at 30mg a day, went up to 60mg, and even tested 100mg just to see how it hit. (I’m on week 5-6)Strength gains were mild, and the hypertrophy wasn’t anything impressive. What really stood out was the performance side … faster recovery, better endurance, and the ability to push harder in training. Makes sense, since this compound was literally designed by the Russians to enhance athletic performance.
My take: yes, the gains are clean and dry … that part’s true. But for me, it’s not a very cost-effective compound. Milligram for milligram, I get more muscle growth and overall performance out of something like Anadrol, for example.
That’s just based on my personal experience … everyone responds differently, and I know some guys who swear by Tbol. To me, it felt pretty similar to Var, which also only does something noticeable for me when I push it up to 80–150mg/day.
Anyway, that’s just my honest opinion on the compound. I totally respect different views. Maybe if I run it again in a simpler stack, I’ll notice different results … who knows.
I'm for sure gonna give it a go. I'll report back my findings.
Hell yeah brother, can’t wait to hear your thoughts on it!
Would like to get some feedback on you experience with it. Might look into some of the super lean tabs and split them in half.
I was thinking about stacking tbol with test/eq since I heard the same thing it’s suppose to be like var but stronger than it. Would make sense for me since I’m trying to stay lean and get some size
Yeah bro, there’s only one way to find out.
Let’s see if I remember to give some feed back after 3 months lol
I just read all the comments. I agree 100%. Yes the blends always seem to be one product overpowering another. I have always made it a rule for myself to run everything separetly. If it is anything other than test i grab the best available according to what i can afford. Most people i notice want to go cheap on everythng they take. Over the years i experimented with shelling out the extra money for the better stuff and the results have simply been cleaner results. Meaning less water retention, better vascularity, harder, and just looking better overall appearance wise. A lot of the young bucks look like water buffalos these days. I always preach daily pins and stable bloods as well. Could make an entire thread on that one.
I agree most products have one powering over the other and never tried them but wanted to give it a shot and wanted reviews before I did.
May have to look into something like that. I just figured a test/eq blend would be convenient instead of getting 2 separate vials bc the one I’m looking at is 1:1 ratio and that’s about what I do. May even do the one with tren in it and call it day. Less volume and saves money lol
We can’t really know the exact mg of each compound in those blends. There’s always some variation. If you ran a janos test, or kind of test for oil concentration, you’d probably see that one of the compounds is either slightly under or slightly overdosed.
If you decide to split and mix them yourself into a sterile vial, you will have more control … but the risk of contamination goes way up. So if you’re gonna do it, make sure you have:
• Sterile empty vial
• Proper filters (0.22 micron)
• Clean transfer technique
• And actually know how to do it safely
Otherwise you’re basically gambling with infection just to adjust mg per ml IMHO.
“ We can’t really know the exact mg of each compound in those blends. There’s always some variation. If you ran a janos test, or kind of test for oil concentration, you’d probably see that one of the compounds is either slightly under or slightly overdosed.”
I see guys say this about blends a lot but that same logic can be applied to single compound vials as well. Does the brewing of blends lead to more variance in concentration?In the end everyone should do what they’re comfortable with.
Personally the only blend I care for is a cut blend. I like running those three compounds at similar doses.
Yeah, you’re 100% right. That logic can apply to any vial, blend or single compound.
The only thing I’ve noticed over the years is that blends tend to show more variability in HPLC testing, and usually it’s one compound in the mix that ends up slightly underdosed. I’m not sure if that’s because certain raw powders cost more than others, or just the difficulty in getting multiple compounds to hold evenly in the same carrier.
I don’t have anything against blends …they can be super convenient, especially for cut stacks. I just personally prefer keeping compounds separate so I can control ratios and adjust based on how I’m responding.
But yeah, at the end of the day there’s always going to be some level of variance no matter what route you choose. We better pick what fits our style and goals, and that’s it.
Yeah same I’ve always been the Type to keep my compounds separate so I can control the dosages but some of the blends are convenient and the ratios are far off from what I wound run.
Yeah that’s true and kinda gambling with blends due that not being sure the accurate mg per ML. I’ve had rip blends before and liked it bc I can run those same R compounds in 1 vial it saves money from buying them separately.
Btw apologies for coming in a little hot earlier. Sometimes I go full retard.
All good brother! It happens bc I’m the same way at times. Just new to seeing all these blends and wanted a review or opinions on them before giving them a try. Im normally buying them all separately but it I can save some money and pin less then im all for it
Well one way to find out is to just try it. Just keep in mind some of these being higher concentrations per ml can cause PIP. Not sure if you’re PIP prone but something else to think about.
This is a good point...I purchased 9 vials (from a source that has left us) that were 100 mgs test p/mast p/tren a. I've never had an issue this PIP but this blend tore me up. Needless to say theres still 8 vials collecting dust.
How did it mess you up?
I did a blend like that over the summer. I had to dilute it with sterile oil because the pip was horrible. No issues after diluting it.
That was my concern too bc I see some people talk about pip bc of the higher concentration. Never had issue with pip. Thanks For the info though man
For sure man. I was just seeing if someone had more insight on these mix blends and was iffy but im gonna give it a try
It’s not going to be as perfectly precise as using each compound from its own vial, but it saves on injection volume usually and is convenient. Personally I’m not “against” blends but I’d rather keep each thing separate incase I want to switch ratio
Apologies for the other day bro and i am the same way. Especially if you need to change flight as your running your course.
Apologies for what
Yeah I’ve always gone to separate compounds but have use a rip blend in the past just for smaller injections volume but im tempted to use this eq/test blend but nervous since I don’t know how much test/eq how much I’m injecting each time
If you read the vial it tells you how much mg per ml of each compound. Mystery solved.
Well yeah I seen that but I wasn’t 100% sure if that was per a cc so that’s why I wanted to ask.
Oh wait that’s his question?? Yea dude it says it on the vial what it contains per CC lol
I assumed that was his question. Probably shouldn’t be using gear without a very basic understanding of how to read doses on vials.