-2 leaking tren vials from 2 different brands, same website..
I have been using a very popular website to purchase tren(#1 ranked site on eroids), they also have a very active subreddit. However they have international warehouses, and domestic US warehouses. I'm not sure if it's relevant to why I'm having issues or not.
Twice now I have ordered tren from the domestic US warehouse, gets here within 3 days.. which is nice.. but not cheap, I am definitely overpaying which is fine, but to receive leaky products sucks.
First I got pharmaqo tren ace, I did about 8 injections before tossing it. I had a huge red WELT that was hot to touch for a week, i had an elevated WBC count as well. So I figured it was a risk at that point(riskier than using tren without a compromised stopper lol that is). It had the same oil build up at the top of the stopper that this new tren has.
Now I have tren E - from pharmacom (not pharmaqo like the first tren was). I verified both were legit from the manufacturers website using the code, I can definitely feel it - but I am not sure if these "Domestic warehouse" trens that are sitting in the US warehouses are somehow using bad stoppers or not.
- Does the vial need to sit up right at all times?
- Is it normal to have small oil build up on top of the stopper?
- I figured going with more "reputable" brands if you can call them that, would lower chances of stuff like that happening.
- I usually pump about .3ml of air into the vial to make drawing easier, then draw it out with a 27g insulin syringe and pin. The same one i pumped the air into it with. I know that's a technique used for test, but maybe it's not good with UGL vials/stoppers, as it never happens with my test, but that I get from the pharmacy not UGL.
- I know I'm probably going to get roasted for using tren, and being clueless about certain things - go easy on me.
The tren itself is a normal clear yellow color. Not cloudy or odd looking in anyway.
I think i'd have better luck buying the international warehouse products from the same company, since the domestic US warehouse ones come with busted stoppers unless im doing something wrong?
- Bookmark
- 0
- 2
None of that adds up. That brand tren DEFF ain’t clearish yellow currently.. Dark as raw honey.. hundreds on here probably using these same products. For most part everyone’s come from the same place regardless who you order from.. lastly if you got infected from that labs oils you probably have poor & unsterile injection practice.. store vials upright & never push in more air than your drawing up, the pressure left inside can cause a vial laid on its side to possibly leak. Try not to penetrate stopper in same spot always. It’s not a target, poke around & make connect the dot designs on it for fun. I rarely ever inject air before drawing up bc Id rather negative pressure in my vials than too much & it draws plenty fast with 25ga then switch to smaller point Both those brands have the better but much tougher stoppers. A smaller gauge insulin needle gonna be dull as fuck after penetrating them
-30, it boggles the mind.
So you pinned a "leaky" vial ? What an asshole.
The only thing leaking here is the logic.
Before launching a conspiracy about domestic warehouses, I’d be looking at injection technique, solvent concentration, carrier oil, and whether you’re just getting brutal PIP or brutal emotional sides from tren.
DUDE!! I cant believe nobody else said this LMAO. Maybe bro is just uber emotional and crying about that little drop thats always left on the stopper when you pull the needle from the vile.
Ok, could have saved all that typing and just do this ^^^^^
I just can’t with these retards
Lmao have you seen my baseball
I said this out loud
I don't get this post. Clean the top of the vial, make sure the stopper is dry. Then shake the vial like it owes you money. Do you see any oil? No? Then it's not leaking and you're gtg. Yes? Send proof to the seller (video of you shaking it and oil coming out) and ask for replacement.
Problem solved.
Pics for proof
1 leaked on other? Sterile wipe. Lids snug...gtg.
Can you elaborate on this sentence, “It had the same oil build up at the top of the stopper that this new tren has.”
I seriously don’t know what that means, I’m trying to visualize but nothing is coming to mind
So the rubber stopper at the top of the vial, has liquid pooling on top of it. like a few rain drops worth of liquid. I wipe it off with an alcohol swab and it goes away and the stopper is dry. My last tren ace from pharmaqo had the same issue, now im having it with the tren E from pharmaCOM. Might be the steroidify US domestic warehouse creating the issue or I'm doing something wrong.
Wouldn’t that indicate that there’s pressure in the vial? Try not pushing air in vial going forward. I never do that
Still doesn’t solve the pip problem. Are you going deep enough? 1.5 inches?
Definitely not, I am injecting in vent glute, and pretty lean - 160 pounds 5'10.5. Its 1/2 inch needle but i am pressing it in quiet deep. Probably explains the PIP. As for the leaky top you are probably correct i shouldnt be pressurizing these tren vial like i did with my pharmacy test vials (which never leak from doing this). Do you think it's contaminated now that it has build up like that or should I be good? I do bloods tomorrow maybe Ill try one more injection see where WBC/CRP and stuff is at. I am also have some barnyard smelling diahrea stools but maybe thats from the diahrea outbreak going on RN in the states. Only done 2 injections from this vial so far.
You not reaching muscle vent glute with 1/2” facts.. any glute ejection regardless the specifics needs 1” minimum & technically should be 1.5” but i completely understand going less than that if your bf allows. For some reason anything beyond that 1” mark suddenly looks huge. Even smaller frame guys at 160 or when leaned down to low bf the ass & luv handles (ventro) is almost always got some fat, unless u full on contest prep & completely peeled. Our asses are designed to have more fat than anywhere else. God was kind enough to cushion our seats naturally. You
Bro you are 5’10 160 lbs. what the fuck are you doing Tren for? Are you fucking crazy?
He should try getting on food first
Barnyard smelling diarrhea stools hahahahahaha
Is this really happening
Leaks, diarrhea, PIP, welts, from 2 separate labs sounds like tren isnt his thing. Time to give it up
Bro your 160lb you need food not gear
If it's hard to eat there's peptides for that I forgot which ones but gears not your answer bud
Those stats need a goddammit steak potatoes and gym. Thats like a 6th grader stats and your story don't match
what about my story doesnt match exactly? i was 103lbs in at 14 years old, 120lbs at 18. Wanna poke fun at that? Whatever floats your boat I guess.
Eat...
1/2 in glute is waaaayyyyy to shallow. That’s explains the pip
It’s not contaminated at all. Quit pushing air in and im sure the problem will fix itself.
Sucks that you threw away perfectly good Tren a.
Finally, the shits have nothing to do with the tren. Actually the tren might be pushing out all the garbage food and toxins in can’t use. You body is probably trying to filter itself…. Or you got that virus
I need to start reading entire threads I guess lol. I seem to have just repeated everything you said hours ago for absolutely no reason.. good to know what im doing is correct tho
actually the tren ace vial started leaking down the sides of it at one point, maybe just from the constant over pressurization, I still have the bottle just dont use it.
Penetrate the stopper with needle only or insulin syringe with the plunger removed. That’ll even pressure out. Don’t inject air anymore & you shouldn’t have any issues.. start pinning deeper too
Penetrate the stopper with needle only or insulin syringe with the plunger removed. That’ll even pressure out. Don’t inject air anymore & you shouldn’t have any issues.. start pinning deeper too
He right dude at least 1in is needed for glute. And sink that fucker til your pushing past your skin. Kinda like if you were to push on your skin with one finger. Make it look like that when you are injecting. Deeper the better
lol sound like me. I be penetrating another 1/8-1/4” above the skin. Rarely use the litttle handles on the syringe. The extra pressure I’m pushing does the injecting
Thats what she said.
Never give them the whole thing, it makes them fall in love.
Yup, once you get passed the used part, she is in love