posted Mon, 03/18/2019 - 23:26
1508699
USROIDS.COM
Estimated T/A:
We are USA domestic supplier only, due to a large volume of orders we are receiving, orders may take up to one week to receive
Minimum Order:
$200
Payment Methods:
we accept bitcoin (BTC) only ,no other payments
Please note
That’s great. I’m going to mix it with some Mast tomorrow and see if that helps
I did more primo than test for my shot, I do every other day so will report back again on Friday.
Glad you figured out what works for you brother. Keep grinding
Another successful landing. 10 days for 8 test-e, 4 mast-e and cialis. No tren this time so i don't have an urge to post about homeboy's eagle claw down below.
Lmfao
Use them raptor claws ya got there and pop the top my man
Lol
Does anybody have a trick to getting the last bit out of these primodept 200 vials? Seems to be .5-.75ml left being a PITA
The 19G needle is very long; that alone is sufficient to aspirate everything
Say something about his ugly ass hand... cmon ya know ya wanna
I don't like insulting people for their problems.
Yeah, I got finger nail clippers and clipped off the metal top and pulled the plunger off and drew out the rest with an 18g needle and it worked perfectly fine if now better because I got all of it!
Bro for a second I thought you were holding that with your foot. I was like "damn, that's a long big toe"
Lol
What?!?!? Just put the needle in like a 1/4 of a mm, flip it upside, and draw… I’m confused
And why pull off the label?
Look up "vial opener" on amazon
https://www.amazon.com/Stainless-Decappers-Medicines-Beverage-Pharmacies...
KPcreekAlways some left over in there. These things are awesome
Just stick your needle in and suck it out! #1 one thing i look for in an employee is problem solving skills. You wouldn't make the cut lol
Those stoppers don’t have the cuts on the sides so all the oil can flow to the needle. You physically can’t get out the last bit because it’s stuck behind the wall of the stopper. Gotta decrimp and pull the stopper to get the last bit out.
I see,!
I stick my string all the way through the side of that stopper at like a 45ish degree angle and I’m able to get all of it out. Had to do it with all the Masteron. It is kind of a nuisance, but hey the mast was great.
Pop the top.. poor it down your back and smack yourself on the ass. That's how you run primo.
Get a bottle opener and pop the top off. Then, just draw it out.
Also; your hand looks like an alien hand
I thought it was a clubbed foot. disappointed when I saw it was his hand.
There's little divits on the outer edge.. I draw through them to get the last bit.. works every time
Others Hplc here
https://verify.janoshik.com/tests/154957-Sample_4_IM8EPFQ75E4M Anavar50
https://verify.janoshik.com/tests/155026-Sample_7_bis_DB4ZPGXX8YCH Ananvar25
https://verify.janoshik.com/tests/154958-Sample_5_RTWM8HJ9NUQV Proviron25
https://verify.janoshik.com/tests/154959-Sample_6_NVK8JTDSHYQ9 Superdrol10
https://verify.janoshik.com/tests/154966-Trenant_3GD43XC7JGQH Trenant200
https://verify.janoshik.com/tests/154967-Enantest_58HCR6I8X3XD Enantest300
https://verify.janoshik.com/tests/154970-Sample_11_KLBX8QAZRBAG Primodept100
https://verify.janoshik.com/tests/154971-Cypiotest250_9X9N99DP6RBU Cypiotest250
https://verify.janoshik.com/tests/154974-Masten_JGWQ4F92PE8J Masten200
Anyone have experience with their cut stack oils 225 or the 150?
Everything I've ordered from usroids has been total fire gear, Im more curious about their results and sides using the cut stack.
Thanks!
I've used the 150 with a little extra test. Good stuff. Make sure you've got all tren ancilliaries on hand
I have 12 vials of the 225 cut stack, but I haven't used it yet. I have used his Mast E and Tren A for a cut last year and it was pretty nasty so I’m looking forward to the blend when I decide to shred down again.