+ 2 Need some advice regarding Ultima 1-Test Cyp
Ok, this is my first run ever with 1-Test Cyp/ DHB, and I still have three and a half weeks left in the two bottles of 1Test Cyp I’m using. I went to load a shot an hour ago, and the first bottle I’ve been using without any issues is fully crashed. I opened the second bottle out of the box and can see it’s also starting to crash. I keep it stored in a bag, inside my nightstand in my bedroom. Always at least 68 degrees in my bedroom. Every shot I’ve taken has been completely PIP free, but the shot I took two days ago hurt during injection. No pain afterwards so far,, but I’m hoping the next one doesn’t fuck me up. Has anyone heard of this happening from one day to the next? It seemed a little cloudy two days ago, but I was in a rush, so I didn’t think about it too much. I heated it up and it went back to normal, but I am going to wait until tomorrow morning to see if it crashes in the syringe. I’ve had a very bad experience in the past pinning crashed gear, and not trying to go through that shit again. I still have a cyst in one of my glutes to show for it. I don’t want to bash the source or the brand because I have used this brand many times, and still have a few bottles of different compounds by the same brand that I have had much longer, and they still look perfect. Is this common with this DHB??? I have two bottles from a different source/brand on the way, because I knew two bottles wasn’t enough, so I just wanted to see which brand worked better, although now I might discontinue in fear of getting another abscess and cyst. Would it really hurt my gains if I have to wait a week or two for the others sources gear to land? They are domestic, so I should have it soon, but would prefer to cut the cycle short if it’s going to get fucked up anyway. Any advice would be greatly appreciated.
- Bookmark
- 2
- 0
I have the same brand and mine is crashed also. I’ll post a pic.
Pics posted. Ahhh never mind this post was 5 months ago
I dont know how true this is but I've heard that it can actually be a good sign when something like dhb crashes, because it means the manufacturer didn't just fill it with crazy amounts of solvent. With something like dhb I guess it's really difficult to get it to dissolve and mix well and alot of labs will just add a shit ton of strong solvents to it and that's why DHB is known for its pip. So if your DHB is pip free they probably used ethyl oleate or propylene glycol or something that's super unhealthy to be injecting but are considered "safe" by the FDA. Again Im not a brewer so I'm not sure how true this is but when I heard it, it made sense to me.
Something crashing is never a good sign
It means they didn't get the ratios right.
https://www.eroids.com/forums/general/off-topic/crystalsshards-inside-ne...
I often heat up back into solution infront a space heater or blow dryer, even under touch type lighter.
Once into solution mix with some 200mg test cyp or sonething not highly dosed.
I also heated everyday into solution and drew in pin with other gear
Either way always worked for me.
Thanks Musclemechanic76
I randomly got a sterile abscess in my right ventro glute from a 2 cc mast prop shot a few weeks ago. It might have been a little too close to my hip bone and maybe seeped in between the bone and muscle? No clue, but I pinned same stuff/vial since and no issues other than normal prop pip. The abscess finally nearly gone after being a golf ball for a week then a marble and now gone. I sometimes am super shaky when doing my glutes and don't have great range of motion to get my other hand over to stabilize the shot. Still don't know what causes these things to happen.
Rustyhooker2cc is a bit shot. Not random. Lack of proper rotation causes sterile abscess. Hense...sterile....versus infection from bad gear.
I actually drained mine myself with a 23 gauge syringe. Took me about 4 days to get it to go away. I also popped Amoxicillin daily. Mine was the size of a grapefruit. Looked insane and hurt to sit down. I probably should have gone to urgent care, but didn’t want that shit on my medical records
Jesus Christ that's insane. Definitely an infection if it was big and painful like that. What came out was it bloody pus/fluid? Wow.
Yellow, bloody sludge. It was fucking disgusting, but along with some antibiotics, I beat it
I'm no professional by no means but I doubt you got an abscess from crashed gear. Maybe contaminated but not crashed
Aggree but sometimes its from bacteria we have on skin.
Crashed gear has slways just crystalled in me snd msde lump and absorbed slower.
I hsve heated crashed high mg gear everyday wnd pinned with no problems.
Virgin muscles can be sensitive and learning to absorb gear with high Molecular Weight has often tsjem time for us to learn. To pip is often from immune response until pir body realizes its harmless.
I use primo ace at up to 100mg per pin but if i have anything like viral immune system will be on high defense.
So alot of factors often involved. I learned these things overtime snd learning my body, we wll different.
Thanks Musclemechanic76
Maybe it was contaminated, but it was definitely crashed, and heated before injection. Hurt like hell during every injection I pinned, and after a week or two, I got a nasty abscess. It really sucked.
Just to make my response clear to everyone, the abscess, injection pain, etc., was from a Primo 100 from a different lab years ago. This crashed Ultima DHB has caused me no PIP at all. So far the crash is the only negative thing about it
Boy, did that change! It ended up being horrible, just like the Primo
Hope this gets sorted out Jake. I'm personally not a fan of anything that I have to heat up each and every single time before injecting. I can tolerate PIP, but anything that crashes, and I heat it up and it falls back into suspension....THEN it crashes again the next day...I'm good with and will pass. I can understand oil solutions crashing due to cold weather while transport, but that's the extent of my tolerance lol good luck though man
Yeah, same here. I’m always worried about it crashing inside of me. That’s what I alway imagine caused the lump in my glute.
Understandable completely cause if it's not staying in suspension, then it's safe to say it's crashing again once injected, hence causing that lump of crystallized shards that you feel. For that main reason, I do not use solutions that crash again once it's been brought back to suspension once. Something aint right. Either crimp job is poor and not tight like it should be, or not enough chems were used in the brewing, either way...not willing to take that chance and risk it when I can find other quality products to use. One and done.
I can't even remember the last time I had to bring something back into suspension. People talk about boiling water and or throwing a vent pin and placing vials in oven....man fcuk all that. I purchase ready made gear to avoid things like that, might as well get raws and make my own solutions if I need to go through all that lol crazy shit. Like i said, I'll throw some dry heat with hair dryer or warm ice pack once and that's it
I hear that! This is the first compound to crash on me in years. I just happened to order two more bottles from a different source because I really like all the other gear I tried from them. One day after I ordered my new stuff, this shit crashed. Felt like Karma for ordering from someone else when I got these two for free in a recent promo. No disrespect to this source, but I’ve never ran DHB before, so I figured I’d jump in a promo to try it out. Just my luck. On Saturday I’ll be due for another pin, and will see if it crashed again, but if I get the new stuff first, I’ll probably just switch over to the new stuff.
If DHB doesn't crash it probably isn't DHB
Every brand I have tried has crashed (except one so far) and I have tried alot. DHB is the one compound I recommend not to hoard, because it will crash eventually.
Thank you!!!! Now I’m happy I didn’t disclose the source.
CloUSMCMan out of all the gear I’ve bought, never had this problem?! Wonder why.
I have no idea either. The syringe I loaded last night was a little cloudy this morning, but not crashed, so I heated it up until the cloudiness went away, and pinned it. No pain during injection, it’s four hours later now, and no PIP. I think I’m good for now. Just wishing my new order from No Excuses drops soon so I can switch over to his gear. I’m not a fan of crashed gear.
My method for crashed gear works every time, and I have not lost a drip of potion.
Its a basic double boil. Using a cup in a small pot i place water in the pot, and water in the cup. The cup should easily conduct heat. Place the gear in the cup, making sure not to submerge the vials, the water level should be label high or slightly less.
Turn on low and set a ten minute timer. Slight inrease temp and slowly bring up to temp. Water should never get above simmer in the pot. In about 30m you will have clear gear, and hot water for some ramen or a french press.
I felt like 1 test was the most important multipler of effects I ever got by adding a compound to a cycle. I suggest heating the gear before pinning, and perhaps even a hot compress for an hour after pinning.
If that oil crashes in your delt you will training legs.
I recall mine hurting bad for about 1 minute and then the taste of nickel and metal in my mouth and then just straight results at the gym I mean vacuum poses and bicep curls baby.
I’ve done this a few times, works really well. Although theses days i generally just chuck it if in any sort of doubt.. I’m not strapped for cash like it was when I was younger.. just dump it and cut your losses.
Right on ST The solution crashing while embedded in the muscle after injecting is not something I'm willing to gamble with. A bolus of crystal shards in a muscle...no thanks I'll pass lol
Remove plastic caps, use a cupcake tray where you can place bottles in the spaces, set oven at 210 degrees,
Place inside for about 10 minutes and every once in a while shape to break up crystals.
Repeat as needed, us hair dryer to warm up before pinning
I have a few bottles of DHB from another source that crashed. I heated up two of them till they were good again and started using them. I had one of the bottles recrash just like yours when there was only about 1/4 a bottle left. I reheated it on an electric candle warmer and shook it, heated, shook, heated to make sure there weren’t any crystals that got stuck the the bottom of the stopper and didn’t melt down. I just make sure I leave it on the candle warmer for 20-30 min before I use it to make sure it is thoroughly melted back into the oil. The one time I hardly heated it up I got pip for a few days but nothing debilitating. If you melt it down good as fuck every time before you inject you should be good --