posted Sat, 09/08/2018 - 13:32
2243
Mixing Compounds
ad
Hello friends,
I have test e 500 and found out that this stuff freaking crippled me on a full shot (1) mil. Even on a 1/2 it knots up and still hurts. The only way I have found to release the knot is to use a massaging machine. What is the safest way to mix this? another test or another e compound. I have a 4 blend test but it has no test e
In the mix.
Thanks
- Bookmark
- 0
- 0
Hello all, thanks again for the help. I cut it to 25% test
50% tren. It was better but still Uncomfortable. Then I felt like a freaking chemist! Diluting the vials. I had too many on the table and said the hell with this. Lesson learned. Once again, people on here really know their
Stuff.
Thanks
It's obvious you weren't feeling like a mathematician.
Dave_61Wait, that's only 75%??
Dave_61Maybe I'm just not understanding this right, but how could you have cut it to 50% tren and 25% test?
Rustyhooker25% air bubble for the buzz of it
Perhaps he used 25% before he cut the 75% that was left with 50% tren leaving 25% test... isn't that the new math?
It is the new millennial math,...... 2+2= what ever you want it to be.
...and whatever answer you come up with wins a trophy.
mix with EQ or Mast works great otherwise use some sterile carrier oils to cut it.
Try to get a 250mg/cc test e., draw up 1cc and mix it with a 1/2cc test e. 500mg.
Preferable same brand!
StevebTest above 400 will always hurt or cause some bad reaction. I don't know why people even bother trying things like that or Boldenone A which is the most painful steroid period.
I thought it would be like the sustonon 500. Not even close! Never hit the Bold A. Don’t think I will now.
Thanks
StevebBold A is really painful and will most likely give you a fever. Bold No Ester will do all that plus wherever you inject will fell like it's broken, that's why no one really makes it anymore. But any Testosterone over 400 should have some pain if not it's probably under dosed, Test above 500 is really bad. There's no point in using stuff that will make it hard to workout and have you feeling sick all the time.
shoot a ml of DHB base, might knock boldenone A off first place.
StevebThey also got Bold No ester which is even worse but Bold Ace is already too much.
The highest dosage I would purchase on a Test e vial is 300mg/ml, anymore than that and I'd be doubtful of it actually containing that amount of test.
Yep, that’s what I’m going to stick with.
Thanks
If you know what you're doing you can mix the Test wit ha Carrier oil using a sterile vial. How much you cut it is up to you!
High dosed compounds can be a bitch especially if you haven’t done many cycles or virgin muscle etc. a lot of it has to do with the ingredients of the gear I recently had some test 450 with absolutely no pip smooth as butter but I’ve also had some test 450 that kicked like a fucking mule. Your best bet is to dilute it with lower dosed test or if your taking another compound mix it with that or as others have said dilute with STERILE carrier oil.
I hit the 400 test E and I was good. Different brand but I thought what’s 100 more right? Hell no.
RustyhookerRead my pip forum?
Yes sir, I did. You always have good info buddy.
Thanks
Dave_61Yeah, that's the reason that me personally, and I'm sure lots of other people stay away from high dose per ml gear. Whether it be a test blend or any compound really. A few high dose gear's that don't bother me are some test 350 blends, and deca 300.
I myself, have bought some very high dose gear in the past that caused bad pip. In my experience, mixing them with EO worked very well for me, but I know that everyone's preference is different. The pip was greatly reduced because EO is actually thinner, and has lower viscosity than grapeseed or cottonseed oil so that's why I used it. And you can easily buy a 50ml or so vial of EO for very cheap!
Also, a heating pad could possibly help with your pip problems for now.
I do not recommend injecting EO ....
Dave_61Can I ask why you don't recommend injecting EO? Like I mentioned, ethyl oleate or EO, is a very thin solvent and has lower viscosity than GSO or Sesame seed oil, or basically any of the popular oils used in steroid preparations. It helps create smooth shots that flow through small pins, and will suspend compounds at much higher concentrations than just oil. It's even said that EO preparations will help extend the shelf life of certain compounds. EO is a great carrier, especially for short esters like propionate, phenylpropionate, and acetate. EO can make 100mg/ml test propionate injections painless!
There are many popular UGL's, and actually some of the best who's products of which many of us use, who actually use EO in the preperation of their gear, especially in the high dose mg/ml brands. I'm not going to just put them out there like that, but believe me it's a fact!
I understand that there is a lot of hearsay regarding the negative reactions that some people may experience. But, as with just about any substance, there are going to be those that are allergic, or their bodies just don't agree with this particular solvent. That doesn't mean that everone should stay away from it, just because some people are allergic to it.
These possible adverse reactions may include such things as injection site pain, swelling, redness at the injection site, irritation, night sweats, or even test-flu like symptoms. But again, these are allergic reactions that only happen to some people, and certainly not all! That's why I don't feel that this very useful solvent should be tossed aside just because some people may possibly suffer some allergic reactions to it.
Mostly everything you read on the internet regarding EO and it's negative sides effects, is just complete hearsay. Not scientifically backed research, but just hearsay and rumors. If you were to search the internet for any information on the negative side effects from EO, the only negative information you will find will be other people's opinions and hearsay from steroid forums and chat rooms. You won't find any definitive proof from any reputable sources, government sources, or true scientific research studies.
Of course if using EO doesn't agree with you, or you're allergic to it in any way, than you should surely stay away from it. However, for the rest of us that are not allergic to it, I believe it can be a very helpful substance with very useful applications. Some of them being the ability to suspend compounds at much higher than normal concentrations, allowing for easy and painless injections, thin and smooth injections that flow through small pins, increasing the shelf life of certain compounds, and not to mention the situation that this post is all about.
RustyhookerI know she will reply with a great amount of info. But you dont want a ton of solvent sitting in your muscle burning, damaging tissues. It doesnt matter what medications use eo.
Eo has been proven to melt vial stoppers and pins plungers during few days storage.
Its caused from a chemical reaction to the rubber . Your muscle isnt made out of rubber.
RustyhookerYa. I know. Point? Pin 1cc of high dosed gear eo based into a steak. Cut it open the next day. Tell me what happened...
Must have moved the needle around ?
RustyhookerLol. Naaa...it ate up the meat.
Those high dose ones are killers for sure. More isnt better
RustyhookerI used to like them when blending a stack. But the amount of solvents in there got me thinking its easier to multi pin.
That’s the way I’m going. Just multi pin
Review the brand so we all don't buy it as well
any 500mg/ml is going to bite pretty good and if it doesn't then chances are it's underdosed.
Try less than 1/2 cc EOD.
Rustyhooker1/2 cc is still 500mg per cc. All you did wan more pin points of pip.
High mg gear is only good for blending
There's sterile cotton seed oil, grape seed oil, MCT oil...start with a 50/50 ratio mix. Pin it, wait a day or two if all is good stick with that. If not go to 75/55.
I usually don't go with the high mg gear. Some compounds I'll go higher mg but usually they suspend easier at a higher mg. You have to ask yourself if you have to add oil to the oil you bought is it really worth it?
Chalk it up to a lesson learned
I did the grape seed oil. I got sick of all the viles I had out and cutting them and said the heck with this!
Thanks Goose, going to mix a tren e 1/2&1/2. If that doesn’t work going your path.
Thanks so very much!
RustyhookerAge: 38
Height: 5'10"
Weight: 185
BF:
mix a tren e 1/2&1/2.
Wow...thats a faceplant
Kinda amazed that he has lived this long.
jayisk"mix a tren e 1/2&1/2"
Maybe he meant mix a tranny? that would be 1/2 & 1/2..
Can lead a horse to water but obviously can't make it drink it. Lol
RustyhookerSome days i saw it all...then tren as a cutying/blending agent.....call me when its over. Lol
just look away Rusty .... look away
RustyhookerHaha! Im with you on mast or eq. Good combo!
Good advice bro +2
jayiskGot a 500 mg mix ONCE. Figured great...,test e, deca, and tren e all in a 1 ML shot. Perfect. FAWK no.
Every time i took a step it felt like a Thai Kick boxer was kicking me in the side of my thigh.
Absolutely right..,, why buy something you need to add more oil too.
LMAO, I know your pain brother! Yep stick to what works best for me.